home casual SONOMA Manual

SONOMA 40"*40" SQUARE FIREPIT TABLE
IMPORTANT: PLEASE READ COMPLETE INSTRUCTION SHEET PRIOR TO ASSEMBLY!
Identify all parts packed in carton against the parts list. Remove all protective
materials and place parts on a nonabrasive surface to avoid scratching. If you have
any questions,please call our Customer Service Center
9:00 a.m.-5:00 p.m. CST) at 1-866-538-7735, (fax:952-946-0031),
e-mail:custserv@homecasual.net or visit our website at www.homecasual.net.
DO NOT ATTEMPT TO ASSEMBLE THE CHAIR IF ANY PARTS ARE MISSING OR
DAMAGED.
STEP 1
Turn the table top (A) upside down. Attach 4 table legs (B) to the table top (A) by inserting the
bolts (F) with metal washers (G) through the pre-drilled hole in the table top and leg.
Tighten all bolts completely and cover them with plastic bolt caps.
STEP 2
Turn the table in the upright position, place the firepit and the ceramic tile into the table. Keep
touch-up paint bottle for future use. NOTE:
manually adjust them to assure the table is fully level on the floor.
Your table is now ready for use.
Thank you for choosing a Home Casual product!
PLEASE READ FOLLOWING NOTICE CAREFULL Y BEFORE USING YOUR FIREPLACE
THIS FIREPIT IS FOR OUTDOOR USE ONLY!
WARNING! UNIT WILL BE HOT WHEN IN USE, FOR SAFETY REASONS,
Do not use the fire pit on a wood deck or on combustible surfaces
such as drygrass, leaves, mulch, etc. Do not use this unit near heat sensitive or
combustible structures such as vinyl or wood siding.
BO
an enclosed
.
structure can be fatal It gives off
carbon monoxide which has no odor.
,
(Monday-Friday,
The glides for the table legs are adjustable, please
DO NOT TOUCH !
firepit in windy
PAST LIST
A TABLE TOP 1
TABLE LEG 4
B
4
C
CERAMIC TILE
D
FIREPIT
1
1
E FIREPIT COVER
F 8
BOLT (M6*20mm)
METAL WASHER 8
G
( 6.5 )
PLASTIC BOLT
H
8
CAP ( M6 )
HEX WRENCH
I 1
TOUCH-UP
1
J
PAINT BOTTLE