Advertisement
Quick Links
Advertisement
Summary of Contents for JETPRIME JP APMU 001
- Page 1 Jetprime_Manual_JP_APMU_001_ENG_rev00 UNIVERSAL GATE OPENER REMOTE CONTROL Ref. JP APMU 001...
- Page 2 MHz, supporting both AM and FM transmission modes. It is powered by a 3V CR2032 battery, making it easy to replace and ensuring long-lasting performance. The JETPRIME remote stands out for its robust construction, featuring a housing made from anodized aluminum, Ø22 mm manufactured through a CNC milling process from a solid block.
- Page 3 Rolling Simple or Rolling Complex), different duplication procedures are required: 1. Press and hold buttons A and D on the JETPRIME remote simultaneously for 5 seconds. The red LED will blink slightly. After 5 seconds, the red LED will stay steadily on.
-
Page 4: Receiver Programming
Jetprime_Manual_JP_APMU_001_ENG_rev00 RECEIVER PROGRAMMING After storing the code on the JETPRIME remote control using the above procedure, check the compatibility table and proceed as follows: Automatic Programming on the Gate (APG): 1. Stand near the automation system. Press and hold buttons A and C simultaneously until the LED starts flashing (about 5 seconds). - Page 5 The warranty is limited to defects recognized by our technical department and to normal use. The warranty is void in case of accident, modification, improper or racing use. Do not install the product on a motorcycle for which it was not designed or tested by JETPRIME. The technical specifications of JETPRIME products and related products are subject to change without notice.
Need help?
Do you have a question about the JP APMU 001 and is the answer not in the manual?
Questions and answers