Summary of Contents for Spillz DASHCLEAN B2
- Page 1 Operating Manual Vacuum Cleaner B2/B3 CONTACT US Phone: 1800- 774 - 559 www.spillz.com.au Email: office@spillz.com.au...
- Page 2 Operating Manual B2/B3 Introductions Dear Valued Customer, Thank you for your trust to Dashclean and for your choosing the B series single phase, wet & dry vacuum cleaner! We hope the machine will be to your satisfaction and meet your expectations. Dashclean is a professional manufacturer of dust extractors, industrial vacuums, air scrubbers, and etc.
- Page 3 Operating Manual B2/B3 Table of Contents 1.Unpacking When unpacking the machine, make sure that the following accessories are included: suction hose: filter Filter basket curved wands 1.5”x2.5m with fittings squeegee floor brush crevice tool round brush If any of the above mentioned parts are missing, please contact AIV. Please dispose of packaging materials and used machine components in accordance with the local environmental disposal law or regulations.
-
Page 4: Technical Data
Operating Manual B2/B3 Technical data data B2 B3 voltage 220-240v / 50Hz cooling system recycle applications wet / dry max. vacuum 220 mbar length of power cord 4.5 m diameter of inlet 40 mm tank capacity 60L 80L dimensions 950x620x600 mm weight 30 Kgs 40 Kgs Identifications of main parts... -
Page 5: Warranty
Operating Manual B2/B3 Warranty Dashclean offers to its customer the vacuums and accessories a 12-month factory warranty for material and manufacturing defects. In the event of any complaint, the machine or agreed part must be returned to AIV for a warranty examination and for any warranty repair or replacement. -
Page 6: Electrical Safety
Operating Manual B2/B3 Do not open the vacuum container with the machine running. Do not wear loose or hanging clothing such as ties, scarves or torn garments that could become trapped and be sucked up by the vacuum cleaner. Do not modify machine from its original design. All repairs must be performed by a qualified service person. - Page 7 Operating Manual B2/B3 Operating instructions Hose connection with vacuum cleaner Insert the suction hose into the suction inlet and rotate it clockwise in full to tighten the connection. To disconnect the suction hose from vacuum cleaner, rotate the hose counterclockwise in full, then pull it out. Hose connection with wands Insert the suction hose onto the wand, and push it firmly to make it securely connected.
- Page 8 Operating Manual B2/B3 Use of floating controller As a protective device, a floating controller is built in with the B2/B3. When the water in tank reaches a certain level, the floating controller is activated, and then the suction is stopped with a warning sound, indicating actions of power-off and draining should be conducted immediately.
-
Page 9: Problem Solving
Operating Manual B2/B3 Problem solving The machine is designed and manufactured for specific applications. Its filter, seals, attachments, and fittings are customised or selected specifically for the applications. Please note that the machine must be protected from knocks and blows. The operator and service personnel must treat the machine with care in order for it to work correctly for an expected life span. -
Page 10: Part List
Operating Manual B2/B3 Part list CONTACT US Phone: 1800- 774 - 559 www.spillz.com.au Email: office@spillz.com.au page- 9 2018 REV. 1.0 ...
Need help?
Do you have a question about the DASHCLEAN B2 and is the answer not in the manual?
Questions and answers