Setting Cable Box Input Channel & Brand - Marantz MV8300 User Manual

16
EN
Turn on the VCR and the TV, and select the AV
mode on the TV.
Set the VCR/TV/CABLE/DBS selector on the
Remote to "VCR".
VCR
CABLE
TV /DBS
2 7
Setting cable box input
channel & brand
After installation, set the cable box input channel and its
brand correctly; otherwise, the Controller cannot work
correctly.
1
2
3
4
3 – 6
INITIAL SETTINGS (cont.)
Turn on cable box
Select a channel other than channel 9 on your
cable box.
Access Main Menu screen on VCR
Press MENU.
Access Cable Set Up screen
1 Press @ # to move
the arrow to
"TUNER SET UP",
then press fi or
OK.
2 Press @ # to move
the arrow to
"CABLE SET UP",
then press fi or OK.
Select cable box input channel
Press %fi to move
the arrow to "INPUT
CH".
Your selection
depends on how your
cable box is
connected to your
VCR.
If your cable box is connected to your VCR's
ANTENNA IN terminal on the rear panel
Press @ # until the channel number
representing the cable box's output (ON CH2 –
ON CH9) appears on the screen.
If your cable box is connected to your VCR's
AUDIO/VIDEO IN connectors on the front panel
Press @ # until "ON F-1" appears on the
screen.
If your cable box is connected to your VCR's
AUDIO/VIDEO IN (L-1) or AUDIO/VIDEO IN
(L-2) connectors on the rear panel
Press @ # until "ON L-1" or "ON L-2" appears
on the screen.
If you do not use a cable box
Press @ # until "OFF" appears on the screen.
FUNCTION SET UP TUNER SET UP INITIAL SET UP
TUNER SET CABLE SET UP DBS SET UP
INPUT CH OFF
BRAND 1
TEST MODE
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT
FUNCTION SET UP TUNER SET UP INITIAL SET UP
CABLE SET UP
INPUT CH
OFF
BRAND 1
TEST MODE
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
EXIT SELECT