Tie-Down Bracket; Product Maintenance - Anaconda Dune 4WD FRONTIER Series Product Manual

Dune 4WD Frontier Fridge/Freezer

Tie-down bracket

For single zone fridges, use the built-in tie-down brackets to secure your fridge
to tie-down points.
For dual zone fridges, the carry handles should be used as a tie-down point.
NOTE: Use all tie-down brackets when securing the fridge via the tie-down
brackets.
NOTE: Always secure tie-down straps to suitable load-bearing structures.
NOTE: Avoid applying too much tension to the strap as this will cause damage
to the tie-down brackets, as well as other parts and accessories.
NOTE: Do not use if the tie-down strap is damaged.
NOTE: Each tie-down bracket can withstand a maximum load of 130kgf.
NOTE: Do NOT apply excessive or unnecessary force to the tie-down bracket.
8
3. Operating Instructions Dune 4WD Frontier Fridge/Freezer

4. Product Maintenance

• Regularly defrost after use.
• Regularly clean the inside and outside of your fridge with a damp cloth.
• Leave the fridge to dry with the lid off or open before long-term storage to
avoid mold and bacteria.
• Maintain the seals: regularly clean and ensure no debris or damage on the
seals, as this is detrimental to cooling.
• Avoid marine environments, as salt can damage components.
NOTE: Disconnect the fridge from power source and unplug cables before
undertaking maintenance activities.
NOTE: Do not use sharp objects to remove ice.
NOTE: Do not leave your fridge in direct sunlight.
NOTE: Avoid using harsh chemicals or abrasive cleaners as they can damage
the surface of the fridge. Once you have wiped down the fridge, leave it
in a shady, dry spot to dry out .
NOTE: Avoid wiping over the compartment temperature sensor directly, as this
can damage the sensor.
4. Product Maintenance
9