Related Manuals for Good Way Technology NDW6000Z1
Summary of Contents for Good Way Technology NDW6000Z1
- Page 1 NDW6000Z1 Wireless Display 1 Pair Dongle TX & RX Pairing SOP Manual Rev 1.0 Copyright 2024 Good Way Technology Co. Ltd.
- Page 2 USB-C with DP Alt Mode Reset Key Pair Button NDW6020Z1 Wireless Display RX Dongle The NDW6020Z1 includes an HDMI connection for TV and monitors compatibility. Reset Button USB-A 5V Power Supply HDMI to Monitor Copyright 2024 Good Way Technology Co. Ltd.
-
Page 3: Pairing Process
PAIRING PROCESS PAIRING PROCESS 1> Initiate the RX Dongle 1) Confirm the “RX Device” of NDW6000Z1. 2) Connect the USB-A side to the power source. 3) After booting, enter the main interface. HDMI 4) Press and hold the button on RX to display the pairing prompt. - Page 4 PAIRING PROCESS 2> Press the Pair Button on the TX Dongle to Pair 1) Confirm the “TX Device” of NDW6000Z1 and connect to the device. 2) Press and hold the Pair button on the TX for about 5 seconds until the light stops.
-
Page 5: Firmware Upgrade
2) Find the SSID displayed. Open the Wi-Fi settings on the device, locate this SSID in the Wi-Fi list, and connect to it 3) When the connectivity is completed, open the device’s web browser and enter the IP address “192.168.203.1” into the settings page. Copyright 2024 Good Way Technology Co. Ltd. - Page 6 1) When entering the setting page, select the router you want to connect to. 2) After configuring and establishing connectivity, the NDW6000Z1’s standby page will switch as follows. 3) Return to setting page and click “Upgrade for transmitter” to start upgrading the TX dongle’s firmware;...
- Page 7 FCC Warning: This device complies with Part 15 of the FCC Rules. Opera�on is subject to the following two condi�ons: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera�on.
- Page 8 IC Warning : IC Radiation Exposure Statement: mobile device This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. portable device (SAR) This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
Need help?
Do you have a question about the NDW6000Z1 and is the answer not in the manual?
Questions and answers