ALL PLUMBING MUST BE COMPLETED manufacturer. BY A LICENSED PLUMBER 3. Do not use outdoors. GET STARTED ALL MEASUREMENTS ARE IN MM (INCHES) 530 [20.9] 680 [26.8] 415 [16.3] 610 [24] 925 [36.4] 1095 [43.1] help.comfortel.com.au...
Page 3
For neatness of finish it is preferable to bring water ALL PLUMBING MUST BE COMPLETED and waste into the washlounge in the same hole. BY A LICENSED PLUMBER • If plumbing location is on floor (see Diagram A), place washlounge over. help.comfortel.com.au...
(See basin installation) Base is secured at two points (as indicated in drawing) THE WASHLOUNGE MUST BE SECURED TO THE FLOOR. Making sure your wash lounge is secure to the floor using appropiate fixings (not supplied). help.comfortel.com.au...
Page 5
Long nut trap (not supplied) to 40mm Plug & Waste Plastic nut Plastic washers (supplied) already installed in the basin. Flat seal Metal washers 7. Connect hot and cold (½” connection) Fitted flange O-ring braided hoses to respective supplies. help.comfortel.com.au...
• solvent based or abrasive cleaning agents MAINTENANCE A periodic inspection of all components and fasteners should be made to ensure that your Comfortel Product is structurally intact and functioning properly. Damaged and broken parts should be replaced and loose fasteners tightened.
Page 7
Comfortel Furniture Pty Ltd. #1900.01.W PICO WASHLOUNGE WITH WHITE BASIN Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in #1900.01.B PICO WASHLOUNGE WITH this document nor does it make expressed or implied warranty of any kind with regard...
Need help?
Do you have a question about the PICO 1900.01.W and is the answer not in the manual?
Questions and answers