Advertisement
Quick Links
Get Started
xx
TA-1592
1. Insert the SIM card
1.Open the SIM card tray: push the tray opener pin
in the tray hole and slide the tray out.
2. Put the nano-SIM in the SIM slot on the tray with
the contact area face up.
3. If you have a second SIM, put it in the SIM2 slot.
4. Slide the tray back in.
Use only original nano-SIM cards. Use of incompati-
ble SIM cards may damage the card or the device,
and may corrupt data stored on the card.
If you have an eSIM card instead of a physical SIM
card, switch on your phone and follow the instruc-
tions on the phone. To be able to activate your
eSIM, you need a Wi-Fi connection.
Note that if you have a single-SIM phone, you can
only have one SIM card, physical or eSIM, active at a
time. If you have a dual-SIM phone, you can have
two physical SIM cards or a physical SIM and an eSIM
active at a time. For information on eSIM cards, con-
tact your network operator.
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
2
1
1. SIM card slot
2. Loudspeaker
3. Flash
4. Camera
5. Programmable key
EN
6. Front camera
4
3
12
7. Programmable key
8. Headset connector
9. Earpiece
10. Volume keys
11. Power/Lock key, Fingerprint sensor
12. USB connector
5
11
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB-C cable. You can also charge your
phone from a computer with a USB cable, but it may
take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
For a product-specific online user guide, safety
instructions, warranty information, and
troubleshooting help, or finding the nearest
authorized service facility, go to https://
www.hmdglobal.com/ta-1592.
6
9
7 8
10
Advertisement
Related Manuals for Nokia OZO TA-1592
Summary of Contents for Nokia OZO TA-1592
- Page 1 Get Started 1. SIM card slot 7. Programmable key 2. Loudspeaker 8. Headset connector 9. Earpiece 3. Flash 4. Camera 10. Volume keys 11. Power/Lock key, Fingerprint sensor 5. Programmable key TA-1592 6. Front camera 12. USB connector 1. Insert the SIM card 2.
- Page 2 Charging time can vary depending on device capability. Some of the required by the FCC for each model. The highest SAR value for this OZO is a trademark of Nokia Technologies Oy. accessories mentioned in this user guide, such as charger, headset, handset model as reported to the FCC when tested for use at the ear or data cable, may be sold separately.
Need help?
Do you have a question about the OZO TA-1592 and is the answer not in the manual?
Questions and answers