Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FreedConn FX Plus
Summary of Contents for FreedConn FX Plus
- Page 1 FX Plus...
-
Page 2: Product Functions
*In order to enable you to obtain the best sound quality experience, it is recommended that the distance between the headset and the ear remains within 2 mm during installation. * Please make sure to charge the FX Plus for at least 1.5 hours before the first use. 1.Product Functions •... -
Page 3: Accessory List
3. Installation Steps Install the base Attach the base in a Align the card slot and suitable position the attach the FX Plus host left side of the helmet. to the base Attach the Velcro of Attach the FX Plus Plug the headphones to the velcro. -
Page 4: Control Panel Introduction
Function Operation Voice prompt ling Power on Press and hold for 2 seconds Welcome to use The blue light FreedConn products, quickly flashes then report the twice then turn to remaining power flash twice every 6 seconds Power off Press and hold for 3 seconds Power off... - Page 5 Function Operation Voice prompt LED indicator ling Check After turning on MESH Report the current No change channel intercom, double-click the channel and electric number and MESH (intercom) button to quantity electric query the current channel quantity number and remaining battery Channel In the boot state or during "Channels 1~5"...
- Page 6 flashing alternately, Connected" state. Open the mobile Connected: Blue LED phone Bluetooth list and flashes choose the device named as FX Plus. Reconnect with "Bluetooth The blue LED flashes In power off state, press the mobile and hold power Connected"...
- Page 7 Function Operation voice prompt LED indicator ling When the power is on and the "enable auto No change Turn automatic answer" or music is paused, press the call answering "disable auto on/off/(pairing) button and the on or off answer" multi-function button at the same time for 2 seconds and then let go.
- Page 8 Function Operation Voice prompt LED indicator ling Operation of Connect A and B at the same “Didi” call time, B has an incoming call answering when A is on the call, press while two the multi-function button to mobile end the call of A, and connect phones are to B at the same time connected...
-
Page 9: Music Sharing
"Intercom lights flashing Bluetooth list of the mobile phone connected" alternately, and select "FX Plus". Connected: Blue LED flashes Connection In the power-on state, B double-click B Tips: No change between 2 host the on/off/(pairing) button to enter... - Page 10 8. Paring between FX Plus and the Third-party Brand Bluetooth Device (Intercom) Tips: 1.Before starting Bluetooth intercom, the two headsets should be connected via Bluetooth. 2.Phone calls are the priority, so intercom can not start if the other user is answering a phone call, only prompt of beep can be heard.
- Page 11 Tips: MESH dynamic networking mode is intercom among multiple users in 1 km, supporting online answering among maximum 16 users at the same time. In this mode, any FX Plus Bluetooth headset of the same model can join the network by one click.
-
Page 12: Voice Prompt
Step Operation Voice prompt LED indicator light Exit MESH The group members can Exit the dynamic long press the MESH network, Du networking (intercom)key to exit the network immediately (The group leader cannot exit the network in the midway Tip: 1. - Page 13 Tips: 1.When a group set“ forbid to join”, and other FX Plus users that are not in the same group start a new network,even they use the same channel, they will not join the network that has set“...
-
Page 14: Technical Parameter
10. Technical Parameter Bluetooth version：5.1+EDR Travel Charger adapter: DC 5V 1A Frequency：2.4 GHZ Battery type: rechargeable (high energy) Weight：53g polymer battery Size：83mmx45mmx23mm Battery material： Ternary material Battery Standby time: If there is no operation model：802060 within 15 minutes after turning it on, Battery capacity：1200mAh it will be turned offautomatically and Voltage：3.7V... -
Page 15: Tips And Troubleshooting
12. Tips and troubleshooting 1. The two earphones don't pair well: Clear the pairing history and reboot to enter the pairing state , then try again. 2. When listening to music, mute one headset or mute the other. Plug the headphones and microphone back in, making sure the headphones are in good contact. - Page 16 Version: V3-2025.03.15...
Need help?
Do you have a question about the FX Plus and is the answer not in the manual?
Questions and answers