Do you have a question about the OC-10TM01 and is the answer not in the manual?
Questions and answers
Summary of Contents for EEZEPC OC-10TM01
Page 1
Smart Pet Water Fountain User Manual technology intelligence health Model:OC-10TM01 Please read this instruction manual carefully before using the product and store it properly. Thank you for purchasing our Smart Water Fountain for Pets. Please read the instructions carefully before use and store it properly...
Page 2
for future reference. Warnings ·This product is only suitable for DC output 5V/1A power adapter. Please use a power adapter appropriate for the given country and region. ·Please read this instruction manual carefully before using. Using or installing the product indicates that you have carefully read and agree to follow the safety instructions.
Set up instructions For first time use, please follow the steps below ☆ 1 , Soak filter in 5-50 ℃ water for about 5 minutes before installation. ☆ It is normal to have the filter-soaked water appear colorless or light yellow, but it is not drinkable. 2 ,...
Page 4
6,Fill bucket with clean pet drinking water within limit(1L~2.5L) ☆water temperature range 5-30℃ 7,Install the filter holder onto the bucket. Note to align the bottom water pipe with the water outlet and assemble in place. 8,Put the soaked filter into the slot for filter holder.
Page 5
2、 Connection and disconnection Connecting to the Pet Water Fountain : Open the Tuya Smart App (if you haven't installed Tuya yet) Smart App, you can install it by scanning the QR code), turn on your phone's Bluetooth and connect your phone to the router you want to connect to.
Page 6
Tuya Smart App Disconnecting the pet water fountain. 1. Please make sure the fountain is online and standing by. 2. Tuya Smart APP → Home → Click “Pet Water Fountain”icon → Click the “pen” icon in the upper right corner of the page →Click “Remove Device”→...
Page 7
3、 APP operation APP display After connected, open the Tuya smart APP. click the water fountain for pets icon, and enter the Pet water fountain for pets control display.
Page 8
Remaining water display and status Water fountain displays the current remaining water volume. When the water volume is higher than the preset reminder water volume, it shows the water volume is sufficient and the bottom is blue. When the water volume is lower than the preset reminder volume, it turns red and shows water shortage.
Page 9
mode corresponding to the description of the working status of the water fountain Regular mode e water fountain is in water dispensing mode for 24 hours. Smart Mode The water will come out for 60 seconds when sensing (Day) pets approaching. If the pet is continuously detected during drinking process, the water will continue to flow until the pet finishes.
Page 10
☆ By observing the water drinking amount, we can see the recent water drinking status. When there is a large fluctuation, it reminds us to pay attention to whether there is an abnormality in the health status of the pet which helps raise awareness of pet health. Machine cleaning time reminder If it is less than 2 days, there will be a red reminder, and the reminder LED on the machine will also flash slowly.
Page 11
After the cleaning is completed, click “Cleaning Reset”. The machine will reset according to the set time and start counting down. To adjust the pre- set time, click the cleaning setting button, and a time setting box will pop up. Select the number of days to be set (1-14 days) and click the “OK” button in the lower right corner to complete the time adjustment.
Page 12
Customer service The warranty service of Pet Paradise covers product failure not caused by user error from the date of purchase. 1, A refund of original payment price or exchange to the same product model within 7 days of purchase are issued due to product malfunction.
Page 13
Frequently Asked Questions QA 1, The network connection prompt failed? The maximum distance between water fountain and wireless router is 20 meters. Connect to the network after the power of the water fountain shuts off for 20 seconds. If the network connecting light is not flashing, press and hold the connect button for more than 5 seconds.
Page 14
7, Why does the mobile display show insufficient water level after refilling the water and after the water reminder light is turned off and the machine is dispensing water normally? Confirm whether the water fountain is offline. If it caused by network delay, the information can be synchronized within 30 seconds normally.
Page 15
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the OC-10TM01 and is the answer not in the manual?
Questions and answers