Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15k
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Chicago Electric 95380
Summary of Contents for Chicago Electric 95380
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
4. DON’T USE IN DANGEROUS ENVIRONMENT. to do a job for which it was not designed. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted. Page 2 For technical questions, please call 1-888-866-5797. Item 95380... - Page 3 It’s safer than using your hand and it frees both hands to operate tool. 21. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop. Item 95380 For technical questions, please call 1-888-866-5797. Page 3...
-
Page 4: Grounding Instructions
3. Feed workpiece against rotation of cutter. 7. Construct an appropriate Push Stick out of wood according to the guidelines on the following page. Page 4 For technical questions, please call 1-888-866-5797. Item 95380... - Page 5 30°-40° of the stick to keep hands out of the line of the blade. • The lower lip of the notch must be no longer than the workpiece is thick. Item 95380 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Safety
If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUcTIONS. Page 6 For technical questions, please call 1-888-866-5797. Item 95380... -
Page 7: Specifications
Refer to Assembly Diagram B. mounting holes (eight total) in the Legs (1B) as a template to mark where eight 1/4″ diameter holes are to be drilled through the workbench. Item 95380 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 Router, push down on the Power Switch and remove the Safety Key. Make sure to store the Safety Key in a safe location, out of reach of children and other unauthorized people. Figure D Page 8 For technical questions, please call 1-888-866-5797. Item 95380...
- Page 9 Depth Rod (18A). Refer to Figure F and Assembly Diagram A. power Switch and Outlets Assembly Knob (12A) Depth Rod (18A) Figure F Item 95380 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Tool Set Up
Bit. Keep the feed rate constant. Feeding the workpiece too quickly will slow the motor of the Router. Feeding the workpiece too slowly will cause burns to the workpiece. Page 10 For technical questions, please call 1-888-866-5797. Item 95380... -
Page 11: Maintenance
Power Switch. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 95380 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Please Read The Following Carefully
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 12 For technical questions, please call 1-888-866-5797. Item 95380... - Page 13 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 95380 For technical questions, please call 1-888-866-5797. Page 13...
- Page 14 Tapping Screw Handle Teeterboard Knob End Bracket Assembly Brush Holder Ball Bearing Carbon Brush Bearing Cover Brush Cap Flat Head Screw Power Cord Spring Line Lock Depth Rod Motor Housing Page 14 For technical questions, please call 1-888-866-5797. Item 95380...
- Page 15 Flat Head Screw Guard Dust Cover Adjustable Fence Machine Screw Wrench 21 m m Torsion Spring Wrench 24 m m Tapping Screw Miter Gauge Machine Screw Chuck Sleeve 1/4″ Spacing Pin Item 95380 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 95380 and is the answer not in the manual?
Questions and answers