If you are unsure about anything regarding your heater or these instructions, please contact Everdure on 1300 766 066 in Australia or (09) 415 600 in New Zealand before operating your appliance.
OPERATING INSTRUCTIONS TURNING ON & OFF Once the unit is in stand-by mode, press the power button once to turn the unit on. The LED display will show the current set temperature. Press again to put the appliance back into stand-by mode (only the decimal point will be displayed).
INSTALLATION GUIDE This heater can either be mounted to a wall or used with the supplied castors. Please note the following safety warnings: This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use the control panel or castor supports when moving the heater (when not wall mounted).
This product should not be disposed of with household waste. Please recycle where facilities exist and check with your local authority for recycling advice. SPECIFICATIONS MODEL INPUT POWER RATED POWER DIMENSIONS (NO CASTORS) WEIGHT NPE1500W 220-240Vac 50Hz 1500W 640x413x113mm (WxHxD) 4.4Kg NPE2000W 220-240Vac 50Hz...
Page 7
It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference. Due to continual product development, Everdure reserves the right to alter specifications or appearances without notice. Dispose of packaging responsibly – recycle where facilities are available.
Page 8
A division of Shriro Australia Pty Ltd 104 Vanessa St Kingsgrove NSW 2208 In Australia: 1300 766 066 In New Zealand: (09) 415 6000 www.everdure.com IM Ref: NPE1500/2000/2400W 13/2015/11 HEAT LIVE RELAX...
Need help?
Do you have a question about the NPE1500W and is the answer not in the manual?
Questions and answers