Advertisement
FCC WARNINGS
• Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Advertisement
Table of Contents
Summary of Contents for DPI IAHB33
- Page 1 FCC WARNINGS • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 2 WARNINGS AND PRECAUTIONS • Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
- Page 3 Features Includes • Bluetooth 5.2 • Wireless Sleep Mask Headphones • Built-in microphone • Micro-USB port for battery • DC battery power: built-in recharge rechargeable lithium-ion battery • Removable electronics for easy cleaning • 10 nature sound settings • Drawstring carrying pouch •...
- Page 4 Controls Power/Pair/Play/ Power/Pair/Play/ Pause/Answer Pause/Answer Press and hold to power Press twice to activate on/off Bluetooth mode or soothing sounds Press to play or pause an audio track Press three times to disconnect Bluetooth Volume −/ Volume +/Next Previous Press once to increase Press to increase volume volume...
-
Page 5: Charging The Battery
Charging the Battery Requires a Micro-USB to USB cable (included). Charge fully before use. Micro-USB to USB 1. Using a cable (included), connect to the USB port of a powered-on computer or USB power adaptor (not included) to charge the unit. -
Page 6: Sleep Timer
Sleep Timer 1. Press the Volume + button twice to hear one beep and activate the sleep timer. The sleep timer will automatically turn off the device one hour after activation. 2. Press the Volume + button twice again to hear two beeps and deactivate the sleep timer. -
Page 7: Pairing A Bluetooth Device
When pairing, remain within 3 feet of the Bluetooth device. 2. Using the controls on your Bluetooth device, select IAHB33 in the Bluetooth Settings to pair. If needed, refer to the user’s manual for your specific device for more information. - Page 8 Nature Sounds Power/Pair/Play/Pause/Answer button twice to play one of the nature Press the selections. Use the Next and Previous buttons to switch between sounds. sound There are ten nature sound options: 1. Campfire 6. Thunderstorm 2. Birds singing 7. Crashing waves and birds singing 3.
- Page 9 Controller and Earphone Removal 1. Carefully slide the right earphone out of the right side of the mask. 2. Tuck the right earphone into the inner pocket of the mask front 3. Remove the power cord from the left side of the mask.
- Page 10 4. Remove the controls from the mask front by sliding them out of the left opening. Gently pull the right earphone through the mask and out of the same opening. 5. Carefully pull the left earphone out of the left side of the mask. To reinsert the earphones and controls, reverse the order of the removal steps.
-
Page 11: Washing Instructions
Washing Instructions Important: Do not wash this product with the electronic components still inside! They must be removed, or damage and injury may result. See previous sections on speaker removal. Machine washing is not recommended for this product. Hand wash only. Do not tumble dry in a dryer. Do not dry clean. 1. -
Page 12: Contact Information
User’s Guide, go to: Email Parts: partsinfo@dpiinc.com Phone Support: www.iLiveElectronics.com 1-888-999-4215 Copyright © 2023 Digital Products International (DPI, Inc.) Made Green All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice. Protect for Today... -
Page 13: International Support
International Support To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour... - Page 14 Lights Out Wireless Sleep Mask Headphones User’s Guide for Model IAHB33 v3039-01...
Need help?
Do you have a question about the IAHB33 and is the answer not in the manual?
Questions and answers