1. Manuals
  2. Brands
  3. iFox Manuals
  4. Modem
  5. EC1270
  6. Getting to know manual

iFox EC1270 Getting To Know Manual

Cdma usb slider
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Thank you for choosing the iFox CDMA 311A USB Slider
Modem. With your USB Slider, you can access a wireless
network at high speed.
Note:
This manual describes the appearance of the USB Slider, as well as the procedures for
preparation, installation, and removal. For operation details about the management
program, see the online help included in the management program.
Getting to Know Your iFox CDMA 311A USB Slider Modem
The following figure shows the appearance of the USB Slider. It is provided only for your
reference. The actual product may be different.
1

Advertisement

Table of Contents
loading

Summary of Contents for iFox EC1270

  • Page 1 Thank you for choosing the iFox CDMA 311A USB Slider Modem. With your USB Slider, you can access a wireless network at high speed. Note: This manual describes the appearance of the USB Slider, as well as the procedures for preparation, installation, and removal.

  • Page 2: Usb Connector

    USB Connector It connects the USB Slider to a PC. Slider It extends or retracts the USB connector. Indicator It indicates the status of the USB Slider.
  • Page 3 Solid: The USB Slider is powered on. Blinking once every 2s: The USB Slider is searching for a network or no network is found. Blinking twice every 2s: The USB Slider finds a network. Blinking once every 0.2s: The USB Slider is transmitting data. UIM Card Slot It holds a User Identity Module (UIM) card.
  • Page 4 the following figure. 3. Replace the back cover and slide it into place. Note: The microSD card is an optional accessory. If it is not provided in the package, you can buy one yourself. Ensure that the beveled edge of the UIM card is properly aligned with that of the UIM card slot and the microSD card is inserted according to the direction as labeled on the microSD card slot.
  • Page 5 well as your USB Slider may get damaged and the data stored on the card may be corrupted. Preparing Your Front Cover 1. Open the front cover of the USB Slider by lifting the cover at the point indicated by the arrow in the left diagram below.

  • Page 6: Installation/Removal Guide

    Installation/Removal Guide The procedure for installing the management program depends on the operating system (OS) installed on your PC. The following sections take Windows XP as an example. Connecting the USB Slider to a PC Push the slider on the side of the USB Slider to fully extend the USB connector. Then plug the USB Slider into the USB port of your PC.

  • Page 7: Starting The Management Program

    Installing the USB Slider Management Program 1. Connect the USB Slider with the PC. 2. The OS automatically detects and recognizes the new hardware and starts the installation wizard. Note: If the auto-run program does not respond, find the AutoRun.exe file in the driver path. Then double-click AutoRun.exe to run the program.

  • Page 8: Removing The Usb Slider

    Removing the USB Slider 1. Double-click in the notification area. Then the Unplug or Eject Hardware dialog box appears. 2. Select the corresponding hardware and then click Stop. 3. When the message "It is safe to remove the device" appears, remove the USB Slider. Uninstalling the Management Program 1.

This manual is also suitable for:

311a

Table of Contents