Summary of Contents for Dearborn GRYPHON
- Page 1 GRYPHON FIBER-OPTIC SATELLITE MODULE INSTALLATION MANUAL Version 1.0 2002 Dearborn Group Inc. 27007 Hills Tech Court Farmington Hills, MI 48331 Phone: (248) 488-2080, FAX: (248) 488-2082 http://www.dgtech.com...
-
Page 2: Important Notice
This document is copyrighted by the Dearborn Group Inc. Permission is granted to copy any or all portions of this manual, provided that such copies are for use with the product provided by the Dearborn Group, and that the name “Dearborn Group Inc.” remain on all copies as on the original. -
Page 3: Table Of Contents
Power indicator ......................5 2.2.4 Battery Low indicator....................5 2.2.5 Battery compartment....................5 2.2.6 Fiber-optic connections to the Gryphon unit ............5 2.2.7 Fiber-optic satellite module hardware specifications ..........6 Table of Figures Figure 1: Fiber-optic modules connected to Gryphon.................. 4... -
Page 4: Introduction
Power via two 9 volt batteries • Power on indicator 1.1 Future document updates Due to the flexibility of the product, the Gryphon will be updated periodically to support new features and networks. For the latest manuals please Technical support... -
Page 5: Technical Support
Fax: (248) 488-2082 E-mail: techsupp@dgtech.com Web site: http://www.dgtech.com 1.4 Related documents For further information regarding the Gryphon, you may wish to consult one or more of the following resources: Dearborn Group (248) 488-2080 Document Version Gryphon Installation Manual On hardware Gryphon... -
Page 6: Hardware Overview / Getting Started
2.2 Hardware overview The following figure shows the external features of the Fiber-Optic Satellite Module, as well as its connection to the back of the Gryphon hardware unit. This particular diagram displays the SW CAN module and the CAN module;... -
Page 7: Db-15 Connector To Vehicle Bus
BATTERY COMPARTMENT I/O PWR BATT LOW Figure 1: Fiber-optic modules connected to Gryphon 2.2.1 DB-15 connector to vehicle bus The fiber-optic module accesses the vehicle bus via a cable attached to the module’s DB-15 connector. The pins available for use will vary depending on the fiber-optic satellite module. -
Page 8: Power Switch
The connectors provided for communication with the Gryphon unit vary. All fiber-optic modules, however, have at least a Tx (Transmit) connector (for transmission of signals to the Gryphon) and an Rx (Receive) connector for the receiving of signals from the Gryphon. -
Page 9: Fiber-Optic Satellite Module Hardware Specifications
GRYPHON Fiber-Optic Satellite Installation Manual 2002 2.2.7 Fiber-optic satellite module hardware specifications Dimensional Height: 1” Width: 6” Depth: 2.3” Radiated susceptibility To 200V/meter and 2000 MHz, Reverb. (GM 9120P) To 200 mA, 1 to 500 MHz, B.C.I (GM 9112P)
Need help?
Do you have a question about the GRYPHON and is the answer not in the manual?
Questions and answers