SHAVEMATE LADYSHAVE 4-in-1 User Manual

LADYSHAVE
4-in-1
Lady Eyebrow Beard
Shaver Trimmer Trimmer
EN
Read through this entire instruction manual before using the 4-in-1 Trimmer Set. We're dedicated to
bringing you well-designed products that make living fun and easy.
HOW TO USE:
CHARGING
1.
2.
3.
INSTRUCTIONS FOR HEAD REPLACEMENTS
To change attachments, hold the trimmer body with the switch facing you. Turn the attachment and pull
it off the body. Place the attachment at the top of the trimmer body, then push it down and attach it.
USING THE TRIMMER
Remove blade cap. Slide the switch to the "ON" position. Gently place the blade of trimmer to your
nostril to cut nose hairs.
Use the same procedure for trimming ear, sidebum and eyebrow hairs and beard.
(A) NOSE/EAR TRIMMER
1.The Nose Trimmer is designed to remove unwanted hair from the nose or ear areas.
2.Gently approach the area to be trimmed. Never force the Nose Trimmer into nose or ear cavities as
this can result in injury.
3.If you experience any pain or discomfort while using this product, STOP using it immediately.
4. Always clean the trimmer after use and use the cap to protect the Nose Trimmer head.
(B) SHAVER FOR LADIES
You can use this attachment for trimming unwanted eyebrow hair, fine facial and ear hair, or any stray
body hairs.
(C) EYEBROW TRIMMER
You can use this attachment for trimming unwanted eyebrow h air, fine facial and ear hair, or any stray
body hairs.
(D) BEARD TRIMMER & BODY SHAVER
1. Move the razor head on the skin against the main direction of beard growth and make straight and
circuitous movements.
2. Achieve the best shaving effect on dry, clean skin.
3.Turn off the shaver's power after using it.
CLEANING & MAINTENANCE
Clean your personal trimmer regularly. Be sure the switch is turned "OFF" before cleaning.
CLEANING WITH THE BRUSH
Never expose the trimmer body to water. To maintain lubrication, use the enclosed brush to clean the
unit.
Thoroughly brush and blow out hair clippings from the power handle.
CLEANING WITH WATER
Your trimmer's attachments have rust-resistant, stainless steel cutting blades that permit the cutting
attachments to be rinsed under running water if you choose. Do not wash attachments when attached
to trimmer. Always keep the blade area pointed downward when cleaning. Only after the unit has dried
completely should the attachment be used.
Nose Hair
* Do not use harsh or corrosive cleaners on the unit or its attachments.
Trimmer
* Do not apply pressure or hard objects to attachments.
Instructions for using 4-in-1 Trimmer Set
Charging: 8 hours
Voltage: DC5V 3W
Turn power switch OFF. Insert plug into the power socket. Light indicator flashes while charging.