Download Print this page
Panasonic ET-LAL6510 Replacement Instructions
Panasonic ET-LAL6510 Replacement Instructions

Panasonic ET-LAL6510 Replacement Instructions

Lamp units for lcd projector

Advertisement

Quick Links

Lamp units for LCD Projector Commercial Use
Read these instructions completely before replacing Lamp unit.
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)
This symbol on the products and/or accompanying documents means that used electrical and electronic products should
not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection points, where they will
be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your
local retailer upon the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health
and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further
details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
Replacement Instructions
1 2 3 4
1 2 3 4 5
1 2 3 4
1 2 3 4 5
Model No.
1 2 3 4
1 2 3 4 5
ET-LAL6510
ET-LAL6510W
(1 pc)
(2 pcs)
TQZH 420-2
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the ET-LAL6510 and is the answer not in the manual?

Questions and answers

Summary of Contents for Panasonic ET-LAL6510

  • Page 1 Replacement Instructions Lamp units for LCD Projector Commercial Use ET-LAL6510 1 2 3 4 1 2 3 4 5 1 2 3 4 1 2 3 4 5 Model No. 1 2 3 4 1 2 3 4 5 (1 pc)
  • Page 2 Precautions with regard to safety Caution The lamp unit should only be replaced by a qualified technician. The lamp cover will be hot after use. • Burns may result if you touch the lamp cover while it is hot. Notes on replacing the lamp unit •...
  • Page 3 Using a Philips screwdriver, remove the 4 PUSH screws on the lamp unit cover located on OPEN the rear of the projector. Lamp unit cover Fixing screws Remove the lamp unit cover by pulling it Fixing screws forward. Caution • Be careful not to break the tab located in the center of the lower side of the lamp unit cover.
  • Page 4 Press the “POWER” button so that a picture is projected onto the screen. MENU Press the “MENU” button to display the INDEX WINDOW MAIN MENU screen, and then press the PICTURE buttons to move the cursor to POSITION select “OPTION2”. AUDIO ZOOM/FOCUS LANGUAGE...

This manual is also suitable for:

Et-lal6510w