Changing the Footpass Counter Default: ..............................7 Changing the Motor Time Default: ................................8 Roll Replacement: ......................................8 Specifications ..............................11 Warranty ................................12 Terra Universal, Inc. • TerraUniversal.com • 800 S. Raymond Ave. • Fullerton, CA 92831 • TEL: (714) 578-6000 • FAX: (714) 578-6020...
The programmable logic controller (PC) includes a readout of the number of passes. Multiple preset limits can be stored to allow simple system updating if the Sole Cleaner is moved from one location to another. The UL-listed take-up motor includes a safety overload shut-off that halts mat motion if an object (or person) is on the Sole Cleaner.
Page 4
2 – White: Neutral (N 120VAC) or Line 2 (L2 240VAC) 3 – Red: Not Used 4 – Grn/Yel: Ground Terra Universal, Inc. • TerraUniversal.com • 800 S. Raymond Ave. • Fullerton, CA 92831 • TEL: (714) 578-6000 • FAX: (714) 578-6020...
Teflon cover underneath for easy sliding of the film. Terra Universal, Inc. • TerraUniversal.com • 800 S. Raymond Ave. • Fullerton, CA 92831 • TEL: (714) 578-6000 • FAX: (714) 578-6020...
Page 6
To open the Settings menu, press the cog icon. The following menu should show up. To go back to the home page, press the house icon. Terra Universal, Inc. • TerraUniversal.com • 800 S. Raymond Ave. • Fullerton, CA 92831 • TEL: (714) 578-6000 • FAX: (714) 578-6020...
Once the counter reaches the preset count (trigger count), motor activation will be delayed by this timer to allow any person on the walking pad to exit the sole cleaner safely. The Terra Universal logo light flashes for indicator and a red or green light bar.
3.4 Changing the Motor Time (Set Time Mat Move) Default: This value is the time that the motor advances the film each time the Sole Cleaner regenerates the surface. The default value of 8 seconds is typically adequate to draw the soiled film completely inside the take-up housing and replace the entire footpath with new film.
Page 9
5. Push back on the face of the quick-release chuck to disengage the chuck from the roller cartridge. (See Figures D and E). Figure D: Removing the Quick- Release Chuck. Terra Universal, Inc. • TerraUniversal.com • 800 S. Raymond Ave. • Fullerton, CA 92831 • TEL: (714) 578-6000 • FAX: (714) 578-6020...
Page 10
10. Insert a standard compressed air jet to lock the cartridge holder against the cardboard cartridge by injecting air into the nipple located on the holder shaft (See Figure F). Figure F: Inflating the Cartridge Holders. Terra Universal, Inc. • TerraUniversal.com • 800 S. Raymond Ave. • Fullerton, CA 92831 • TEL: (714) 578-6000 • FAX: (714) 578-6020...
ASTM D 882 Elongation (%) ASTM D 882 ASTM D 882 Adhesion (oz/in) to stainless steel 8.0 – 12.0 PSTC-1 Terra Universal, Inc. • TerraUniversal.com • 800 S. Raymond Ave. • Fullerton, CA 92831 • TEL: (714) 578-6000 • FAX: (714) 578-6020...
Need help?
Do you have a question about the Sole Cleaner and is the answer not in the manual?
Questions and answers