VTech Bop & Learn Guitar User Manual

Bop & Learn Guitar
User's Manual

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the
unit. Use a coin or a screwdriver to loosen
the screw.
3. Install 2 new 'AAA' (UM4/LR03) batteries
following the diagram inside the battery
box.
4. Replace the battery cover and tighten the
screw to secure.

BATTERY NOTICE

• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries from the equipment when the unit will not be used
for an extended period of time.
• Always remove exhausted batteries from the equipment.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are to
be used.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.

INCLUDED IN THIS PACKAGE

- One VTech Bop & Learn Guitar™
®
- One instruction manual
™
1

PRODUCT FEATURES

1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF SWITCH
to the ON ( ) position. To turn the unit OFF,
slide the ON/OFF SWITCH to the OFF (
position.
2. AUTOMATIC SHUT-OFF
To preserve the battery life, the VTech
automatically power-down after approximately 30 seconds without input.
The unit can be turned on again by pressing any button.
ACTIVITIES
1. Slide the on/off switch to turn the unit on. You
will hear a guitar sound, a song and a short
phrase. The light will flash with the sound.
2. Press the number buttons to hear numbers,
colors and insect names identified, as well as
short tunes, sounds and melodies. The light
will flash with the sound.
3. Move the slider to hear a variety of phrases,
sounds, melodies and songs. The light will
flash with the sound.
)
Bop & Learn Guitar™ will
®
2