Clas Ohlson MQG5C6028H1F1-150L Manual

Potted LED
Christmas Tree
Art. no 44-4329 Model MQG5C6028H1F1-150L
Please read the entire instruction manual before using the
product and then save it for future reference. We reserve the
right for any errors in text or images and any necessary
changes made to technical data. In the event of technical
problems or other queries, please contact our Customer
Services (see address details on the back).
Safety
Warning:
• The LED lights cannot be replaced.
• The product must only be connected to the included mains
adapter.
• The mains adapter is only intended for using with the
included product. Never connect additional string lights or
other types of products to the mains adapter.
• The mains lead must never be replaced. If the mains lead
is damaged the entire product must be discarded.
Assembly
1. The tree is made up of 3 parts. The plant pot stand with a
built-in lower section of the tree, the middle section and top
section of the tree.
UNITED KINGDOM • customer service tel: 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
postal Clas Ohlson Ltd, Aquilla House (First floor), 1 Becketts Wharf, Lower Teddington Road, Hampton Wick, Kingston Upon Thames, KT1 4ER
2. Insert the middle section of the
tree (the part with the longest
branches) into the lower section
of the tree.
3. The lights built into the top and middle sections of the tree
need to be connected together. Check where the connector
on the middle section of the tree is located before attaching
the top section of the tree. Then insert the top section
of the tree into the middle section and screw the lighting
connectors together.
4. Bend out the branches, connect the mains adapter to the
lights and then plug it into an electrical socket.
Care and maintenance
Clean the product by wiping it with a damp cloth. Use only mild
cleaning agents, never solvents or corrosive chemicals.
Responsible disposal
This symbol indicates that the product should
not be disposed of with general household waste.
This applies throughout the entire EU. In order to
prevent any harm to the environment or health
hazards caused by incorrect waste disposal, the
product must be handed in for recycling so that
the material can be disposed of in a responsible manner.
When recycling your product, take it to your local collection
facility or contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound manner.
Specifications
Mains adapter Input 220–240 V AC, 50/60 Hz
Output 31 V DC, 120 mA, max 3.6 W
IP rating IP44
180 x 72 cm
Dimensions