Advertisement
Quick Links
5. Online Technical Support
If you have access to the World Wide Web be sure to visit the Zoltrix home page at:
http://www.zoltrix.com
You may also want to read the updated Modem Questions and Answers located at:
http://www.zoltrix.com/modem-qa.htm
You may also locate the complete AT commands and Windows 95 drivers from the following
page:
http://www.zoltrix.com/modem.htm
You may also locate the Technical Support phone numbers and e-mail addresses on the
Tech Support Web page at:
http://www.zoltrix.com/techsupp.htm
3QF-56KVSPE2
Quick Installation Reference Card
External V.90 Fax/Modem
with
Speaker Phone Functions
56,000 bps Data
115,200 bps Throughput
V.90/K56Flex 56,000 bps Data Modem
14,400 Send & Receive Fax
MNP2-4 & V.42 Error Correction &
MNP5 & V.42bis Data Compression
Full Featured Voice Messaging
Full Duplex Speakerphone Functions
2 Mega Byte Flash ROM Equipped
Leading the world in fax/modem technology
Model: FM-VSP56E2
Advertisement
Summary of Contents for Zoltrix Rainbow 56K
- Page 1 5. Online Technical Support Model: FM-VSP56E2 If you have access to the World Wide Web be sure to visit the Zoltrix home page at: Quick Installation Reference Card http://www.zoltrix.com You may also want to read the updated Modem Questions and Answers located at: http://www.zoltrix.com/modem-qa.htm...
- Page 2 V.90 56 kbps High Speed External answers after two rings). Voice/Fax/Speaker Phone Modem Problem: The modem always answers the phone Set the S0 register to 0. ATS0=0 In addition to high speed fax and data transfer functions your fax/modem supports the following additional voice features giving you a personal voice messaging system with speakerphone, Problem: The communications software displays, "No Dialtone".
- Page 3 Your modem may need servicing. Call your dealer about available warranty services. Before You Install Your Modem... Problem: Modem does not respond to dialing commands (TD and RD LED's do not Most computers have 2 serial ports and 1 parallel ports. An external modem requires that illuminate and modem will not dial.) one serial port is enabled and recognized by the computer.
- Page 4 Testing Software Settings for Windows 3.1x to Enable the 16550 UART To enable the use of the UART, you must edit the SYSTEM.INI file in your Windows directory. The actual installation of the modem is now complete. Before attempting to use your modem, you Add the following line to your SYSTEM.INI file under the [386enh] section: should complete the following steps: COMxFIFO=1...
Need help?
Do you have a question about the Rainbow 56K and is the answer not in the manual?
Questions and answers