Table of Contents
Advertisement
Quick Links
(Translation of the Original Instructions)
Instruction, Use and Maintenance Manual
SINGLE SEAT VALVE
BBZP - BBZR - BBZT
BBYP - BBYR - BBYT
BBZPPG
Bardiani Valvole S.p.A.
via G. di Vittorio, 50/52 - 43045 Fornovo di Taro (PR) - Italy
tel. +39 0525 - Fax 0525 3408
bardiani@bardiani.com - www.bardiani.com
EN-IST-BBZP-0225
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bardiani BBZP
Summary of Contents for Bardiani BBZP
- Page 1 Instruction, Use and Maintenance Manual SINGLE SEAT VALVE BBZP - BBZR - BBZT BBYP - BBYR - BBYT BBZPPG Bardiani Valvole S.p.A. via G. di Vittorio, 50/52 - 43045 Fornovo di Taro (PR) - Italy tel. +39 0525 - Fax 0525 3408 bardiani@bardiani.com - www.bardiani.com...
- Page 2 10.4 Pneumatic valves BBZP - BBZR - BBZT- BBYP - BBYR - BBYT - BBZPPG 10.5 Disassembly of the BBZP - BBZR - BBZT - BBYP - BBYR - BBYT - BBZPPG Disassembly of the BBZP - BBZR - BBZT - BBYP - BBYR - BBYT - BBZPPG Disassembly of the BBZP P7-LL 10.6 Assembly of the BBZP - BBZR - BBZT - BBYP - BBYR - BBYT - BBZPPG...
- Page 3 16 2D diagram BBZT 17 2D diagram BBYP 18 2D diagram BBYR 19 2D diagram BBYT 20 2D Diagram BBZP M8 Solid Body - BBZPPG 21 2D diagram BBZP Diverter 22 Diagram BBZP M8-LLL Diverter 23 Diagram BBZP M9-LLL Diverter...
- Page 4 Maintenance Manual" by all means, whether it be electronic, on hard copy, mechanical or any other means or recording or reuse is strictly prohibited without the prior written consent of the Manufacturer and for any use other than that of the Buyer. EN-IST-BBZP-0225...
-
Page 5: Safety,Warning And Mandatory Signs
WARNING burns Severe burns Take Care, risk of explosions WARNING Risk of explosions Spent oil must be collected in appropriate containers and WARNING! disposed of in accordance with the relative legislation in Do not disperse in the force environment EN-IST-BBZP-0225... -
Page 6: Skilled Personnel
Follow the regulations in force in the country of used ENVIRONMENTAL governing waste disposal. NOTE Use of a clamp CLAMP Use of a clamp with jaws made from soft material CLAMP WITH SOFT JAWS Use of a press PRESS EN-IST-BBZP-0225... - Page 7 OF FOODSAFE GREASE Use AGIP GREASE MU EP 2 SE or similar. APPLICATION OF MULTIPURPOSE GREASE Use SPEED BOND M500 threadlock or similar. THREADLOCK APPLICATION Sequence of assembly disassembly operations ASSEMBLY / DISASSEMBLY SEQUENCE Use SPRINTER ADPV32 or similar OPTIONAL EN-IST-BBZP-0225...
-
Page 8: Operator Training
All persons who have to work on the valve must be qualified to carry out the relative maintenance tasks. They must be informed as to the possible hazards involved and must observe all the safety instructions set out in this manual. Allow expert personnel only to work on the electrical components. EN-IST-BBZP-0225... -
Page 9: General Safety Warnings
Safety Safety 2.1 General safety warnings Intended use Bardiani valves have been exclusively for moving fluids. Prohibited use The valve must not be used: • for any operations different to those described under the heading “Intended Use”, • for handling fluids different to the type specified by the manufacturerand indicated in the valve's technical data. -
Page 10: Technical Data
- valves with DN125 or bigger with group 2 fluids. The end user must carry out noise assessment testing once the valve has been installed in the plant. In the event of any doubt, please contact Bardiani Valvole S.p.A. EN-IST-BBZP-0225... -
Page 11: Checking / Unpacking / Lifting
- Check the inside of the valve. 2. UNPACKING: The valve packaging is made up of cardboard, wood and plastic. The valve is mainly made up of metal materials. The gaskets are usually made from elastomers. Disposal must be in compliance with local legislation. EN-IST-BBZP-0225... - Page 12 The figures above are used purely to represent the methods and procedures for hoisting valves. Handle device according regulations force country of use. Bardiani Valvole S.p.A. declines all liability for any damage to things and/or injuries to persons caused by improper and/or incorrect hoisting of the valve. EN-IST-BBZP-0225...
-
Page 13: Installation
In single acting valves there is only one of the aforementioned commands. 2. REDUCING THE STRESS TO WHICH THE VALVE IS SUBJECTED: - Vibrations; - Thermal expansion of the piping; - Excessive welding; - Overload. CAUTION! The seal seats may become deformed or cause valve malfunctioning. EN-IST-BBZP-0225... - Page 14 If the valve is fitted with connectors, you may proceed with installation. Correctly insert the gaskets and tighten the connectors. CAUTION! Bardiani Valvole S.p.A. declines all liability for any damage to things and/or injuries to persons caused by any failure to correctly follow the installation procedures.
-
Page 15: Minimum Maintenance Clearances
BBZP-BBZM - BBYP - BBZT - BBZR A (mm) B (mm) C (mm) 10-25 32-40 CAUTION! Bardiani Valvole S.p.A. declines all liability for any damage to things and/or injuries to persons caused by any failure to correctly follow the installation procedures. EN-IST-BBZP-0225... - Page 16 Installation 7.PREPARING THE VALVE FOR INSTALLATION: To move the valve (dn125-dn150), first screw in the eye bolts. Once valve installation has been completed, remove the eyebolts and put the screws back in. EN-IST-BBZP-0225...
-
Page 17: Operation
Never touch the moving parts if the actuator is supplied with complessed air 2. DUAL FUNCTION OF THE VALVE CYLINDER: Depending on how the valve cylinder is turned and installed, operation will be in normally open or normally closed mode. Normally closed Normally open EN-IST-BBZP-0225... -
Page 18: Troubleshooting
Change from normally open Difficulty opening and closing Incorrect operation of the (NO) to normally closed (NC) or actuator vice versa Actuator inspection and Impurities in the actuator maintenance Disassemble and correctly Incorrect valve body positioning reposition the valve body EN-IST-BBZP-0225... - Page 19 Chlorine- and chloride-free water Washing 70 °C Caustic soda (NaOH) at 1% Intermediate rinse Environment Chlorine- and chloride-free water Washing 70 °C Nitric acid (HNO3) at 0.5% End rinse Environment Chlorine- and chloride-free water Recommended washing product velocity = 2m/s EN-IST-BBZP-0225...
- Page 20 Acid ( Nitric / Phosphoric / Peracetic acid) <2% <2% Diluted cleaning solution Minimum temperature 1 °C 1° C Max temperature 40 °C 65 °C Disinfection <0,7% <0,7% Diluted disinfectant (based on peracetic acid) Minimum temperature 1 °C 1° C Max temperature 30 °C 30 °C EN-IST-BBZP-0225...
- Page 21 - disconnect the valve from the power supply - remove the valve from the system - move the valve in observance of the rules set out in the heading "Lifting" - to dismantle the valve, refer to the heading "Disassembly" EN-IST-BBZP-0225...
-
Page 22: General Maintenance
Maintenance operations must be carried out with the line stopped and all utilities (electricity, compressed air) disconnected. CAUTION! Always discharge the fluid pressure in the valve and piping before disassembling the valve. CAUTION! Burns hazard. The valves and piping may be very hot. Wear protective gloves EN-IST-BBZP-0225... -
Page 23: Scheduled Maintenance
Replace at the end of the day Replace in the event of leaks Check correct operation and Check correct operation and that there are no leaks that there are no leaks Periodical Record the actions carried out Record the actions carried out EN-IST-BBZP-0225... -
Page 24: Tools Useful For Disassembly/Reassembly
Maintenance 10.3 Tools useful for Disassembly/Reassembly TOOLS DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150 4 - 6 - 8 10-12- 10-12- 10-12 10-12-13-17- 13-15- 13-15- 10-12-13-15- 10-12-13-19- -13-19 19-24 17-19- 17-19- 19-21-22-24 20-22-24 22-24 BETA 99ST 35-50 EN-IST-BBZP-0225... - Page 25 Maintenance [BBZP] 10.4 Pneumatic valves BBZP - BBZR - BBZT- BBYP - BBYR - BBYT - BBZPPG DESCRIPTION Lower body Shutter Sealing ring Sealing washer Screw Cylinder Bush Sealing ring Bush Sealing ring Air connector Shutter nut Clamp Screw Assembly...
- Page 26 Maintenance (DN125-150) (BBYP - BBYR) (BBZP P7-LL) (DN125-150) (BBZR - BBYR) (BBZP : M8 - BBZPPG) 34 (DN10-100) 8 (DN125-150) (BBYP - BBYR) (BBZP: M8-LL / P7-LL) (P.T.F.E.) EN-IST-BBZP-0225...
- Page 27 Maintenance 10.5 Disassembly of the BBZP - BBZR - BBZT - BBYP - BBYR - BBYT - BBZPPG EN-IST-BBZP-0225...
- Page 28 Maintenance [A S BBZP] [B S BBZP P7-LL] EN-IST-BBZP-0225...
- Page 29 Maintenance [A S BBZP] Disassembly of the BBZP - BBZR - BBZT - BBYP - BBYR - BBYT - BBZPPG (Normally closed) BBZP EN-IST-BBZP-0225...
- Page 30 Maintenance BBZPPG EN-IST-BBZP-0225...
- Page 31 Maintenance (Normally open or double acting) BBZP BBZPPG EN-IST-BBZP-0225...
- Page 32 Maintenance (BBZPEX M8-LL) Normally closed EN-IST-BBZP-0225...
- Page 33 Maintenance Normally open or double acting (BBZPEX M8-LL) EN-IST-BBZP-0225...
- Page 34 Maintenance (BBYP - BBYR - BBYT) EN-IST-BBZP-0225...
- Page 35 Maintenance (P.T.F.E.) [S BBZP] EN-IST-BBZP-0225...
- Page 36 Maintenance [B S BBZP P7-LL] Disassembly of the BBZP P7-LL (Normally closed) Never touch the moving parts if the actuator is supplied with complessed air EN-IST-BBZP-0225...
- Page 37 Maintenance Normally open or double acting EN-IST-BBZP-0225...
- Page 38 Maintenance EN-IST-BBZP-0225...
- Page 39 Maintenance (P.T.F.E.) EN-IST-BBZP-0225...
- Page 40 Maintenance [S BBZP] (BBYP - BBYR - BBYT) EN-IST-BBZP-0225...
- Page 41 Maintenance (BBZR - BBYR) (DN10-100) (DN125-150) (DN10-100) (DN125-150) EN-IST-BBZP-0225...
- Page 42 Maintenance (BBZTEX) [BBZT] EN-IST-BBZP-0225...
- Page 43 Maintenance [CYL] (DN 10-100) (DN 125-150) EN-IST-BBZP-0225...
- Page 44 Maintenance 10.6 Assembly of the BBZP - BBZR - BBZT - BBYP - BBYR - BBYT - BBZPPG EN-IST-BBZP-0225...
- Page 45 Maintenance (DN 10-100) (DN 125-150) EN-IST-BBZP-0225...
- Page 46 Maintenance 10.6.1 Select normally close or normally open cilynder Normally Close Normally open EN-IST-BBZP-0225...
- Page 47 Maintenance (BBZT - BBYT) (BBZR - BBYR) (DN10-100) (DN10-100) (DN125-150) (DN125-150) EN-IST-BBZP-0225...
- Page 48 Maintenance (BBYP - BBYR - BBYT) EN-IST-BBZP-0225...
- Page 49 Maintenance (BBYP - BBYR - BBYT) EN-IST-BBZP-0225...
- Page 50 Maintenance [A M BBZP] [B M BBZP P7-LL] EN-IST-BBZP-0225...
-
Page 51: Normally Open
Maintenance [A M BBZP] Assembly of the BBZP - BBZR - BBZT - BBYP - BBYR - BBYT - BBZPPG (P.T.F.E.) Normally Close Normally open EN-IST-BBZP-0225... - Page 52 Maintenance (BBYP - BBYR - BBYT) EN-IST-BBZP-0225...
- Page 53 Maintenance Normally closed EN-IST-BBZP-0225...
- Page 54 Maintenance Normally open or double acting EN-IST-BBZP-0225...
- Page 55 Maintenance (Normally closed) BBZPPG EN-IST-BBZP-0225...
- Page 56 Maintenance Normally open or double acting BBZPPG EN-IST-BBZP-0225...
- Page 57 Maintenance (BBZP M8-LL) EN-IST-BBZP-0225...
- Page 58 Maintenance [GIOTTO] [BBZT] [BBZP DEV] EN-IST-BBZP-0225...
-
Page 59: B Assembly Of The Bbzp P7-Ll
Maintenance [B M BBZP P7-LL] Assembly of the BBZP P7-LL (P.T.F.E.) EN-IST-BBZP-0225... - Page 60 Maintenance Normally Close Normally open EN-IST-BBZP-0225...
- Page 61 Maintenance (Normally closed) Never touch the moving parts if the actuator is supplied with complessed air EN-IST-BBZP-0225...
- Page 62 Maintenance (Normally open or double acting) EN-IST-BBZP-0225...
- Page 63 Maintenance [GIOTTO] EN-IST-BBZP-0225...
- Page 64 Maintenance [BBZP DEV] 10.7 Pneumatic Valves BBZP - BBZR - BBZT- BBYP - BBYR - BBYT Diverters DESCRIPTION Lower body Upper shutter Sealing ring Sealing washer Screw Cylinder Bush Sealing ring Bush Sealing ring Air connector Shutter nut Double shutter...
- Page 65 Maintenance (DN125-150) (BBYP - BBYR) (DN125-150) (BBZR - BBYR) (P.T.F.E.) 34 (DN10-100) 8 (DN125-150) (BBYP - BBYR) EN-IST-BBZP-0225...
- Page 66 Maintenance BBZP M8-LLL (P.T.F.E.) EN-IST-BBZP-0225...
- Page 67 Maintenance BBZPEX M9-LLL EN-IST-BBZP-0225...
- Page 68 Maintenance 10.8 Disassembly of the BBZP - BBZR - BBZT- BBYP - BBYR - BBYT Diverters EN-IST-BBZP-0225...
- Page 69 Maintenance [A S BBZP DEV] [B S BBZP M8-LLL] [C S BBZP M8-LLL PTFE] EN-IST-BBZP-0225...
- Page 70 Maintenance [A S BBZP DEV] Disassembly of the BBZP - BBZR - BBZT- BBYP - BBYR - BBYT Diverters (Normally closed) Never touch the moving parts if the actuator is supplied with complessed air EN-IST-BBZP-0225...
- Page 71 Maintenance EN-IST-BBZP-0225...
- Page 72 Maintenance Normally open or double acting Never touch the moving parts if the actuator is supplied with complessed air EN-IST-BBZP-0225...
- Page 73 Maintenance (Normally closed) (BBZP M9-LLL) Never touch the moving parts if the actuator is supplied with complessed air EN-IST-BBZP-0225...
- Page 74 Maintenance (Normally open or double acting) (BBZP M9-LLL) EN-IST-BBZP-0225...
- Page 75 Maintenance (BBZP-M9-LLL) EN-IST-BBZP-0225...
- Page 76 Maintenance (P.T.F.E.) EN-IST-BBZP-0225...
- Page 77 Maintenance (BBYP - BBYR - BBYT) [B S BBZP DEV] EN-IST-BBZP-0225...
- Page 78 Maintenance [B S BBZP M8-LLL] Disassembly of the BBZP M8-LLL Diverter (Normally closed) EN-IST-BBZP-0225...
- Page 79 Maintenance (Normally open or double acting) Never touch the moving parts if the actuator is supplied with complessed air EN-IST-BBZP-0225...
- Page 80 Maintenance EN-IST-BBZP-0225...
- Page 81 Maintenance (Normally closed) Never touch the moving parts if the actuator is supplied with complessed air EN-IST-BBZP-0225...
- Page 82 Maintenance (Normally open or double acting) EN-IST-BBZP-0225...
- Page 83 Maintenance EN-IST-BBZP-0225...
- Page 84 Maintenance [B S BBZP DEV] (BBYP - BBYR - BBYT) EN-IST-BBZP-0225...
- Page 85 Maintenance (BBZR - BBYR) [BBZT] EN-IST-BBZP-0225...
- Page 86 Maintenance (DN 125-150) [M BBZP DEV] EN-IST-BBZP-0225...
- Page 87 Maintenance [C S BBZP M8-LLL PTFE] Disassembly of the BBZP M8-LLL Diverter with PTFE EN-IST-BBZP-0225...
- Page 88 Maintenance EN-IST-BBZP-0225...
- Page 89 Maintenance EN-IST-BBZP-0225...
- Page 90 Maintenance EN-IST-BBZP-0225...
- Page 91 Maintenance EN-IST-BBZP-0225...
- Page 92 Maintenance EN-IST-BBZP-0225...
- Page 93 Maintenance EN-IST-BBZP-0225...
- Page 94 Maintenance EN-IST-BBZP-0225...
- Page 95 Maintenance EN-IST-BBZP-0225...
- Page 96 Maintenance [M BBZP DEV] 10.9 Assembly of the BBZP - BBZR - BBZT- BBYP - BBYR - BBYT Diverters EN-IST-BBZP-0225...
- Page 97 Maintenance (DN 125-150) EN-IST-BBZP-0225...
- Page 98 Maintenance 10.9.1 Select normally close or normally open cilynder Normally Close Normally open EN-IST-BBZP-0225...
- Page 99 Maintenance (BBZT - BBYT) (BBZR - BBYR) (DN125-150) EN-IST-BBZP-0225...
- Page 100 Maintenance (BBYP - BBYR - BBYT) EN-IST-BBZP-0225...
- Page 101 Maintenance (BBYP - BBYR - BBYT) EN-IST-BBZP-0225...
- Page 102 Maintenance [A M BBZP DEV] [B M BBZP M8-LLL] [C M BBZP M8-LLL PTFE] EN-IST-BBZP-0225...
-
Page 103: Normally Open
Maintenance [A M BBZP DEV] Assembly of the BB ZP - BBZR - BBZT- BBYP - BBYR - BBYT Diverters (BBZP M9-LLL) Normally Close Normally open EN-IST-BBZP-0225... - Page 104 Maintenance (BBYP - BBYR - BBYT) EN-IST-BBZP-0225...
- Page 105 Maintenance (P.T.F.E.) EN-IST-BBZP-0225...
- Page 106 Maintenance (Normally closed) EN-IST-BBZP-0225...
- Page 107 Maintenance Never touch the moving parts if the actuator is supplied with complessed air EN-IST-BBZP-0225...
- Page 108 Maintenance (Normally open or double acting) Never touch the moving parts if the actuator is supplied with complessed air EN-IST-BBZP-0225...
- Page 109 Maintenance EN-IST-BBZP-0225...
- Page 110 Maintenance (BBZP M9-LLL) EN-IST-BBZP-0225...
- Page 111 Maintenance (BBZP M9-LLL) EN-IST-BBZP-0225...
- Page 112 Maintenance (BBZP M9-LLL) EN-IST-BBZP-0225...
- Page 113 Maintenance (BBZP M9-LLL) EN-IST-BBZP-0225...
- Page 114 Maintenance [BBZT] [GIOTTO] EN-IST-BBZP-0225...
- Page 115 Maintenance [B M BBZP M8-LLL] Assembly of the BBZP M8-LLL Diverter Normally Close Normally open EN-IST-BBZP-0225...
- Page 116 Maintenance EN-IST-BBZP-0225...
- Page 117 Maintenance (Normally closed) Never touch the moving parts if the actuator is supplied with complessed air EN-IST-BBZP-0225...
- Page 118 Maintenance (Normally open or double acting) EN-IST-BBZP-0225...
- Page 119 Maintenance EN-IST-BBZP-0225...
- Page 120 Maintenance (Normally closed) EN-IST-BBZP-0225...
- Page 121 Maintenance (Normally open or double acting) Never touch the moving parts if the actuator is supplied with complessed air EN-IST-BBZP-0225...
- Page 122 Maintenance [GIOTTO] EN-IST-BBZP-0225...
- Page 123 Maintenance [C M BBZP M8-LLL PTFE] Assembly of the BBZP M8-LLL Diverter PTFE Normally Close Normally open EN-IST-BBZP-0225...
- Page 124 Maintenance EN-IST-BBZP-0225...
- Page 125 Maintenance (Normally closed) EN-IST-BBZP-0225...
- Page 126 Maintenance EN-IST-BBZP-0225...
- Page 127 Maintenance EN-IST-BBZP-0225...
- Page 128 Maintenance (Normally open or double acting) EN-IST-BBZP-0225...
- Page 129 Maintenance EN-IST-BBZP-0225...
- Page 130 Maintenance Never touch the moving parts if the actuator is supplied with complessed air [GIOTTO] EN-IST-BBZP-0225...
-
Page 131: Pneumatic Valves Bbzt - Bbyt
Maintenance [BBZT] 10.10 Pneumatic Valves BBZT - BBYT DESCRIPTION Air connector Piston Grub screw Cylinder Sealing ring Screw Sealing ring Sealing ring Buffer Bush Elastic wire Bush Upper pin EN-IST-BBZP-0225... - Page 132 Maintenance EN-IST-BBZP-0225...
-
Page 133: Disassembly Of The Bbzt - Bbyt
Maintenance 10.11 Disassembly of the BBZT - BBYT EN-IST-BBZP-0225... - Page 134 Maintenance EN-IST-BBZP-0225...
- Page 135 Maintenance EN-IST-BBZP-0225...
- Page 136 Maintenance [CYL] EN-IST-BBZP-0225...
-
Page 137: Assembly Of The Bbzt - Bbyt
Maintenance 10.12 Assembly of the BBZT - BBYT EN-IST-BBZP-0225... - Page 138 Maintenance EN-IST-BBZP-0225...
- Page 139 Maintenance EN-IST-BBZP-0225...
- Page 140 Maintenance EN-IST-BBZP-0225...
- Page 141 Maintenance EN-IST-BBZP-0225...
- Page 142 Maintenance EN-IST-BBZP-0225...
- Page 143 Maintenance EN-IST-BBZP-0225...
- Page 144 Maintenance [GIOTTO] EN-IST-BBZP-0225...
- Page 145 Maintenance 10.13 Shaft stroke limiter DESCRIPTION Screw Mechanical stop Screw Shaft stroke limiter Shaft stroke limiter EN-IST-BBZP-0225...
- Page 146 Maintenance [BBZP LIM] Inlet Outlet EN-IST-BBZP-0225...
- Page 147 Maintenance 10.14 Shaft stroke limiter disassembly Inlet Outlet EN-IST-BBZP-0225...
- Page 148 Maintenance 10.15 Shaft stroke limiter assembly Inlet Outlet EN-IST-BBZP-0225...
- Page 149 Maintenance Inlet Outlet EN-IST-BBZP-0225...
- Page 150 Maintenance Inlet Outlet EN-IST-BBZP-0225...
- Page 151 Maintenance [BBZP SPMORZ] 10.16 Idraulic damper DESCRIPTION Cylinder Bush Bush Screw threaded rod Damper Assembly Sealing ring Sealing ring EN-IST-BBZP-0225...
- Page 152 Maintenance 10.17 Idraulic Damper disassembly EN-IST-BBZP-0225...
- Page 153 Maintenance EN-IST-BBZP-0225...
- Page 154 Maintenance EN-IST-BBZP-0225...
- Page 155 Maintenance EN-IST-BBZP-0225...
- Page 156 Maintenance 10.18 Idraulic Damper assembly EN-IST-BBZP-0225...
- Page 157 Maintenance EN-IST-BBZP-0225...
- Page 158 Maintenance EN-IST-BBZP-0225...
- Page 159 Maintenance 6 hg EN-IST-BBZP-0225...
-
Page 160: Ec Declaration Of Conformity Of The Machinery
- A5-P-PRG-GB EC DECLARATION OF CONFORMITY OF THE MACHINERY (EC) 2006/42, Annex. II, p. 1 A BARDIANI VALVOLE S.p.A. Via G. di Vittorio 50/52 – 43045 Fornovo di Taro (Pr) – Italia Declares under its own responsibility that the machine:... - Page 161 2D diagram BBZP 12 2D diagram BBZP DN125 - 150 DN125 - 150 [BBZP] PTFE Execution EN-IST-BBZP-0225...
- Page 162 2D diagram BBZP M8-LL 13 2D diagram BBZP M8-LL PTFE Execution [BBZP DEV] EN-IST-BBZP-0225...
- Page 163 2D diagram BBZP P7-LL 14 2D diagram BBZP P7-LL [BBZP] PTFE Execution EN-IST-BBZP-0225...
- Page 164 2D diagram BBZR 15 2D diagram BBZR PTFE Execution [BBZP] EN-IST-BBZP-0225...
- Page 165 2D diagram BBZT 16 2D diagram BBZT [BBZT] EN-IST-BBZP-0225...
- Page 166 2D diagram BBYP 17 2D diagram BBYP [BBZP] PTFE Execution EN-IST-BBZP-0225...
- Page 167 2D diagram BBYR 18 2D diagram BBYR [BBZP] PTFE Execution EN-IST-BBZP-0225...
- Page 168 2D diagram BBYT 19 2D diagram BBYT [BBZT] EN-IST-BBZP-0225...
- Page 169 2D Diagram BBZP M8 Solid Body - BBZPPG 20 2D Diagram BBZP M8 Solid Body - BBZPPG [BBZP] EN-IST-BBZP-0225...
- Page 170 2D diagram BBZP Diverter 21 2D diagram BBZP Diverter DN125 - 150 DN125 - 150 [BBZP DEV] PTFE Execution EN-IST-BBZP-0225...
-
Page 171: Diagram Bbzp M8-Lll Diverter
Diagram BBZP M8-LLL Diverter 22 Diagram BBZP M8-LLL Diverter [BBZP DEV] EN-IST-BBZP-0225... -
Page 172: Diagram Bbzp M9-Lll Diverter
Diagram BBZP M9-LLL Diverter 23 Diagram BBZP M9-LLL Diverter DN125 - 150 DN125 - 150 [BBZP DEV] PTFE Execution EN-IST-BBZP-0225... - Page 173 2D diagram BBZR Diverter 24 2D diagram BBZR Diverter [BBZP DEV] PTFE Execution EN-IST-BBZP-0225...
- Page 174 2D diagram BBZT Diverter 25 2D diagram BBZT Diverter [BBZT] EN-IST-BBZP-0225...
- Page 175 2D diagram BBYP Diverter 26 2D diagram BBYP Diverter [BBZP DEV] PTFE Execution EN-IST-BBZP-0225...
- Page 176 2D diagram BBYR Diverter 27 2D diagram BBYR Diverter [BBZP DEV] PTFE Execution EN-IST-BBZP-0225...
- Page 177 2D diagram BBYT Diverter 28 2D diagram BBYT Diverter [BBZT] EN-IST-BBZP-0225...
- Page 178 2D Diagram BBZP cylinder with damper 29 2D Diagram BBZP cylinder with damper [BBZP SPMORZ] EN-IST-BBZP-0225...
- Page 179 2D diagram BBZP stroke limiter 30 2D diagram BBZP stroke limiter [BBZP LIM] EN-IST-BBZP-0225...
- Page 180 2D diagram BBZP stroke limiter 31 2D diagram BBZP stroke limiter [BBZP LIM] EN-IST-BBZP-0225...
-
Page 181: Warranty Exclusions
Notwithstanding and without prejudice to the rights of the Buyer, which may be acknowledged by applicable law, this warranty it to be intended as limited, at the discretion of Bardiani Valvole S.p.A., to the repair and/or replacement of the Product and/or part of the Product and/or its components which is/ are found to be defective due to design and/or manufacturing and/or material faults. - Page 182 Manufacturer Bardiani Valvole S.p.A. holds to be reliable nevertheless the above is not deemed to be assumed as fully exhaustive inasmuch as not every possible use has been envisaged.
- Page 183 Recommendations NOTES EN-IST-BBZP-0225...
- Page 184 Bardiani Valvole S.p.A. via G. di Vittorio, 50/52 - 43045 Fornovo di Taro (PR) - Italy tel. +39 0525 400044 - fax +39 0525 3408 bardiani@bardiani.com - www.bardiani.com...
Need help?
Do you have a question about the BBZP and is the answer not in the manual?
Questions and answers