Page 3
RFR-24DR2-A THANK YOU Thank you for your purchase. We’d like to welcome you to the AMD Direct family of luxury outdoor kitchen products and look forward to being a part of your home for years to come. As a family business with over 20 years of industry experience, we aim to deliver exceptional quality and personal service.
SAFETY AND INSTALLATION INSTRUCTIONS WARNING CAUTION Before the appliance is used, it must be properly 1. Stainless steel exposed to chlorine gas positioned and installed as described in this and moisture – such as areas with spas manual, so read the manual carefully. To reduce or swimming pools –...
GENERAL SAFETY REQUIREMENTS ENERGY SAVING TIPS WARNING • The appliance should be located in the coolest area of the room or outdoor location, away from heat-producing FOLLOW WARNING CALLOUTS BELOW appliances and out of direct sunlight. ONLY WHEN APPLICABLE TO YOUR •...
BEFORE OPERATING Shipment Arriving Damaged: WARNING VISIBLE DAMAGE If your shipment arrives with visible damage to the ELECTRICAL PARTS & COMPONENTS box/carton, be sure the damage is noted on the bill of freight or express receipt and signed by the Disconnect all power supplies and batteries person making the delivery.
TROUBLESHOOTING Many common problems can be solved easily, saving you the time spent communicating with customer service. Try the suggestions below to see if the issue has a simple solution. PROBLEM POSSIBLE CAUSE REMEDY Appliance does not operate. Appliance is not connected to a power Connect the appliance.
OPERATING YOUR APPLIANCE It is recommended that you install the appliance INSTALLATION OF YOUR APPLIANCE in a place where the ambient temperature is This appliance has been designed for both built-in between 50°F and 109.4°F (10°C-43°C). If the ambient and freestanding applications. When built-in, the temperature is above or below recommended refrigerator drawers do not require additional air temperatures, the performance of the unit may...
INSTALLATION 1. Position the unit to allow free air flow through the NOTE: front grille. If the unit is relocated, the bracket must be removed and installed in the new location. LEVELING THE UNIT Position the unit on a flat, level surface capable of supporting the entire weight of the unit when full.
INSTALLATION EXTENSION CORD ELECTRICAL CONNECTION Because of potential safety hazards under certain Put the screws on top of the drawer where the conditions, it is strongly recommended that you handle is to be installed. Align the handle with do not use an extension cord with this appliance. screws, tighten the screws using the screwdrivers.
Need help?
Do you have a question about the RFR-24DR2-A and is the answer not in the manual?
Questions and answers