ANGELBLISS BASSINET Manual

AFTER-SALES SERVICE

What problems did you encounter when using the product?

• Unable to install or missing parts, detailed installation tutorial is required
• Need rectum the produced( Contact us, we will bear the freight for you)
• Damage caused by express delivery
• Difficult to install the product
• The quality of the product

No Matter What Problem You Encounter, Please Contact Our Professional After-Sales Team:
Email: Dada@angelblissbaby.com
Facebook Page

We Will Give You a Perfect Solution Within 12 Hours

1. As designed of the product has many safety locks, some parts are disassembled and separated during packaging. Please read this manual carefully before using this product and keep it for future reference.
2. Please ensure the bed frame is fully open before you used it, the all locking devices are in the locked state.
3. In order to avoid suffocation of children, please do not put products that can cause suffocation in children.
4. Don't put children in an unattended place.
5. Before using the crib, please check if it is damaged, please do not continue to use it.
6. It is recommended to close the bed safe locks when you need to leave for a short time, so as to prevent the baby from turning over and posing a danger. It is for baby safe, strictly forbidden to squat or lean on the bed.
7. Please be sure to follow the instructions when assembling and disassembling, so as to affect safety

INSTALLATION INSTRUCTIONS

Please read this manual carefully before using the product, install the product in strict accordance with the manual, please keep the manual for future inquiry.

LIST OF ACCESSORIES IN THE BAG:

Please keep baby away from the bed when assemble or disassemble the bed. The product must be used under parental supervision.

CORRECT INSTALLATION STEPS

1. The design of wheels is convenient to carry and suitable for travelling.
   

2. Follow the arrow to open the package.
   

3. Before installation, the wheels must be locked in the direction of the arrow to prevent the bed from sliding during installation.
   
4. After doing the above points, the first step is to slightly open the bed body, and then lift the two short side armrests upwards until the safety lock is locked. Pay attention (do not press the safety lock button when installing, only when folding, the safety lock button only needs to be pressed).
   

5. In the second step, lift the 2 long side armrests until the safety lock is locked, pay attention (do not press the safety lock button when installing, only when folding the safety lock button only needs to be pressed ).
   

6. In the last step, after all the 4-side safety locks are locked, press down the bed as shown in the figure. Note (do not press down the bed when the 4 sides are not locked).
   

NOTE*

• When you encounter collapse when installing the bed, please turn to the next page.

SOLUTION FOR INSTALLATION FAILURE

1. When the 2 long side handrails collapse.
   
2. When 2 short-side handrails and one long-side handrail collapse,
   
3. When the 2 short side handrails collapse.
   
4. When you encounter the above types of collapse, follow the arrow to pull the bed to the highest point.
   
5. Then lift the collapsed armrests one by one until the buckle is locked, and then press down the bed as indicated by the arrow (the best solution to the collapse of the bed).
   
6. Congratulations, the installation of the folding bed is complete.
   

When you encounter an installation problem that cannot be solved through the manual, please contact the after-sales mailbox on the manual. We will develop a specific video for you to help you successfully install it.

HOW TO ASSEMBLE ROCKING TUBES

Install the rocking tubes in the following way

Note: When folding the bed, you must first remove the 2 rocking tubes, and then fold the bed. The bed cannot be folded when the 2 rocking tubes are not removed.

1. Find out place at two bottom short side.
   
2. Press it, connecting the bed's tubes at bottom.
   
3. Like above picture 1
   
4. Like above picture 2
   

1. Install the changing table according to the picture.
   
2. Press the button as indicated by the picture
   

USING THE BEDSIDE SLEEPER MODE

One side of bed can be lifted up&down to connect with adult bed by 4 different height.
No. 1 height is the height of double layer.
No.2 is other one height as your personal favourite.
No.4 is the height of baby bed.

1. Close the latch to fix the height and open the latch to adjust the height.
   

2. Pull zipper down to the height of No.1 -No.4.
   

3. When you lift, press the button with both hands at the same time and step on the bottom tube with your foot for better lifting,
   

4. In side bed mode, be sure to lock the second lock as shown for the safety of your baby.
   

HOW TO CONNECT ADULT BED

To connect the baby bed with adult bed&keep baby from dropping down and harm, we strongly suggest doing like below:

HOW TO FOLD THE BABY BED

Step 1 : Take off all changing table/storage rack/mat etc, only leave bed body for folding Note: When folding the bed, you must first remove the 2 rocking tubes, and then fold the bed, The bed cannot be folded when the 2 rocking tubes are not removed)

Step 2: Lift the middle of the bed slightly, and then press down the safety lock buttons of the two long side armrests until the armrests are U-shaped instead of V-shaped (Note: When it is V-shaped, continue to press the button down).

Step 3: Raise the bed to the highest level* and then press down the safety lock buttons of the two short-side armrests until the armrests are U-shaped instead of V-shaped (note: continue to press the button when it is V-shaped)

Step 4; The bottom Of the 4-side armrest is U-shaped instead of V-shaped, and the installation is completed.

SPECIAL NOTICE.
When the folding bed is presented (FlG.11), do not press the bed body hard. Because long side handrail is not pressed completely, you need to fold again to press long Side armrest button, until its flank is at right Angle.

As The Bedside Sleeper, need to note below
SUFFOCATION HAZARD!

• DO NOT use this product without reading the instructions
• Only use accessories and fitted sheets provided by ANGELBLISS.
• Once the child can sit down or pull himself up or push his hands and knees up, Stop using this function as Bedside Sleeper.(important)
• When the child is used normally in the bed, the caregiver must not leave.
• It is recommended to rest at night and close the bed lock when you need to leave for a short time to avoid the danger of children turning over.
• Before use, please make sure the frame is fully opened and all locking devices are locked (important).
• Please use safety belts during use.(important)
• DO NOT add mattresses, pillows, bedspreads or cushions to soft bedding
• DO NOT use the product if there are gaps between the lowest part of the co-sleeping crib and the parent's mattress, DANGER!

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ANGELBLISS BASSINET Manual