Advertisement
Quick Links
1 DENSO NEC76F0039AGD 175822-799 HINO
1.1
PLUGIN 0833: NEW TRASDATA
For a correct identification of the ECU, it is necessary to open the ECU and always check that the
numbers printed on the motherboard exactly match those shown in the picture of the manual.
Do not rely on the numbers on the ECU cover.
DENSO NEC76F0039AGD 175822-799 HINO
This manual is the property of DIMSPORT S.R.L.
Translation of the original instructions
DIMSPORT S.R.L. - 15020 Serralunga di Crea (AL) - Tel.: +39 0142 9552 - Web:
https://ecutools.vn/
User manual
ATTENTION
www.dimsport.it
2024 - 04
Ver.: 1
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Denso NEC76F0039AGD 175822-799 HINO
Summary of Contents for Denso NEC76F0039AGD 175822-799 HINO
- Page 1 DENSO NEC76F0039AGD 175822-799 HINO 2024 - 04 User manual Ver.: 1 1 DENSO NEC76F0039AGD 175822-799 HINO PLUGIN 0833: NEW TRASDATA ATTENTION For a correct identification of the ECU, it is necessary to open the ECU and always check that the numbers printed on the motherboard exactly match those shown in the picture of the manual.
- Page 2 DENSO NEC76F0039AGD 175822-799 HINO 2024 - 04 User manual Ver.: 1 CONNECTIONS 1.2.1 LOOSE WIRES CONNECTION ATTENTION After making all the connections, connect a stabilized power supply to the New Trasdata and make sure that the POWER LED (red) is on.
- Page 3 DENSO NEC76F0039AGD 175822-799 HINO 2024 - 04 User manual Ver.: 1 WIRE COLOUR GREEN BLUE PURPLE GREY WHITE BLACK BROWN ORANGE YELLOW GREEN ATTENTION For proper reading and writing operations, it is necessary to perform a LINK between the pads displayed in the picture here below.
- Page 4 DENSO NEC76F0039AGD 175822-799 HINO 2024 - 04 User manual Ver.: 1 1.2.2 CONNECTION WITH ADAPTER F34NTA16 ATTENTION After making all the connections, connect a stabilized power supply to the New Trasdata and make sure that the POWER LED (red) is on.
- Page 5 DENSO NEC76F0039AGD 175822-799 HINO 2024 - 04 User manual Ver.: 1 F34NTA16 soldering adapter Verify the pin 1 location and connect the pin 18 to the F34NTA16 adapter using the grey wire supplied. This manual is the property of DIMSPORT S.R.L.
- Page 6 DENSO NEC76F0039AGD 175822-799 HINO 2024 - 04 User manual Ver.: 1 Solder the strips on the pads and position the F34NTA16 adapter as shown in the following picture. Use the flat cable F34NTF03 to connect the adapter F34NTA16 to the DIGITAL PORT of the New Trasdata.
- Page 7 DENSO NEC76F0039AGD 175822-799 HINO 2024 - 04 User manual Ver.: 1 1.2.3 METAL POSITIONING FRAME CONNECTION ATTENTION After making all the connections, connect a stabilized power supply to the New Trasdata and make sure that the POWER LED (red) is on.
- Page 8 DENSO NEC76F0039AGD 175822-799 HINO 2024 - 04 User manual Ver.: 1 Adapter F34DM023 is required for the connection with the metal positioning frame. Verify the pin 1 location and connect the pin 18 to the corresponding ENA clamp on the base adapter F34DM023 by using a wire.
- Page 9 DENSO NEC76F0039AGD 175822-799 HINO 2024 - 04 User manual Ver.: 1 Use the flat cable F34NTF03 to connect the adapter F34DM023 to the DIGITAL PORT of the New Trasdata. ATTENTION The following photo illustrates the correct positioning/connection of the adapter on the ECU.
Need help?
Do you have a question about the NEC76F0039AGD 175822-799 HINO and is the answer not in the manual?
Questions and answers