Advertisement
Bluetooth
USB Adapter
TM
Connect your peripherals and computing devices
without cables
/ BU-2063-J
BU-2080J
BU-2081J
BU-2090J
BU-2091J
Quick Installation Guide
Introduction
PC System Requirements
• PC-compatible computer, CPU speed of 200MHz or above
• Memory: 64MB or above, 128MB recommended
• One available USB port, USB 1.1 standard
• Windows
® 98 SE, Me, 2000, and XP
Product Contents
• Bluetooth USB Adapter
• CD-ROM for installation software and documentation
• Quick Installation Guide
1
Step 1: Software Setup
Softw are Setup for Windows 98 SE, Me, 2000, and XP
To install the software for the USB Adapter, follow the instructions below:
Note: The installation process for Windows XP may look slightly different from Windows
98 SE, Me, and 2000.
Note: Do not insert the USB Adapter into the USB port prior to software
installation.
1. Insert the software installation CD-ROM
into the PC's CD-ROM drive.
2. The "Software InstallShield Wizard"
window appears. Click on "Next" to
begin the installation process.
Advertisement
Table of Contents
Summary of Contents for TRAC BU-2080J
- Page 1 Bluetooth USB Adapter Connect your peripherals and computing devices without cables / BU-2063-J BU-2080J BU-2081J BU-2090J BU-2091J Quick Installation Guide Introduction PC System Requirements • PC-compatible computer, CPU speed of 200MHz or above • Memory: 64MB or above, 128MB recommended •...
-
Page 2: Step 1: Software Setup
Step 1: Software Setup 3. Choose “I accept the terms in the license agreement” to accept the license agreement. Click on “Next” to continue. - Page 3 4. Specify the location where the software files will be installed on your hard drive. It is recommended that you install the software in the default directory “C:\Program Files\WIDCOMM\ Bluetooth Software\”. Click on “Next” to continue.
- Page 4 5. Confirm that the device software is ready to be installed and click on “Install”.
- Page 5 6. The InstallShield Wizard will begin to install the Bluetooth Software. This may take several minutes. Step 1: Software Setup 7. During the installation process you may be prompted to insert your USB Adapter. If your USB Adapter is not plugged into your computer at this time, you may insert it into an available USB 1.1-compliant port on your desktop or notebook computer, then click “OK”...
- Page 6 Note: If at any time during the installation process you receive a “Driver Signature Notice”, click “OK” to continue the installation process. Step 1: Software Setup 8. Confirm the completion of the software installation; click “Finish” and restart the system if prompted to do so. Step 1: Software Setup Hardware Setup for Windows 98 SE, Me, 2000, and XP Follow these instructions to install your USB Adapter on your PC.
-
Page 7: Step 2: Hardware Setup
available USB A-type connector on your desktop or notebook computer. Your system should register a new USB device found. 2. Choose “Install from a list or specific location”; then click “Next”. Step 2: Hardware Setup 3. Browse for the location of the device driver “:\Program Files \WIDCOMM\ Bluetooth\Software\bin\”... - Page 8 4. If you receive the following “Hardware installation notice”, click on “Continue Anyway” to continue with the installation process.
- Page 9 Step 2: Hardware Setup 5. A window will appear that confirms the completion of the hardware installation; click on “Finish” to complete the installation process. Step 2: Hardware Setup Uninstalling the Software for Windows 98 SE, Me, 2000, and XP Follow these instructions to uninstall your USB Adapter on your PC.
-
Page 10: Federal Communication Commission Interference Statement
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the BU-2080J and is the answer not in the manual?
Questions and answers