MOMO GLOW
SPECIFICATIONS
width
height
12.2"
power
weight
4.9 oz
color
battery
1800 mAh
temperature
detection
-10ºC~40º
composition:
plastic, ABS, PP, coating,
stainless steel, LED, eletronic
circuit, lithium battery.
Controls-Functions / Parts
OFF
The light will not turn on.
ON
The light will remain on until battery
runs out or function is changed.
aluminum
light
Important safety measures:
Basic safety measures should always be followed when
using electrical appliances.
Precautions:
1) Important: Read all instructions
carefully before using for the first time.
2) To protect against fire, electric shock,
and injury to people, do not place the USB
cord or base in water or any other liquid.
See cleaning instructions.
3) Close supervision is necessary when
any appliance is used by or near children.
4) Disconnect the USB cable when
charging is complete, before cleaning,
and before fitting or removing parts.
Important NOTES:
Precautions:
1) The sensor area cannot be covered.
2) Avoid placing the product near heat
sources, such as oven cover, heating
outlet, humidifier, and other places where
the temperature changes abruptly.
cleaning instructions:
5) For cleaning, use a soft cotton cloth.
Charging instructions:
6) After a long period of use, if there is a
reduction in the brightness of the light, it
means that the battery is running low,
charge the product using the USB cable.
7) The red light indicates that the charging
is in progress.
Installation
instructions:
1) there are two ways to attach your lamp:
By sticking the metal holder to the wall,
cabinet, or desired location. First, remove
the protective film from the double-sided
adhesive and stick it behind the metal
holder. Then, remove the protective film
from the other side's adhesive and stick it
in the most appropriate place.
Cleaning instructions:
Sensor Operating Area
specification:
1) The light turns on up to a distance of 3-4m in front of the sensor and 2-3m on the sides,
covering a 120º angle around the sensor. The induction e ect is related to ambient
temperature, body shape, and movement speed.
+1 305 929 8850
care@momo-lifestyle.com
1.1"
2,5 w
4000 K
10-13ft, 6-10ft.
support
manual in English
AUTO
Mode for dark environments. When
motion is detected, the Momo Glow
will automatically turn on. It will
remain on, and turn o again 30
seconds after final motion has been
detected.
sensor
5) Do not charge your appliance with
damaged USB cables as this may cause
damage to it. Contact Momo Lifestyle
customer service for information about
electrical or mechanical repairs and
adjustments.
6) The use of accessories not recommended
by Momo Lifestyle can result in fire, electric
shock, or injury.
7) Do not leave the USB cable hanging over
the edge of a table or counter, nor touch hot
surfaces.
8) This appliance is not a toy.
3) Do not disassemble the product. This will
also result in automatic loss of warranty.
4) Avoid letting the lamp receive direct
sunlight.
8) The green light indicates fully charged.
9) For longer battery life, the first charge
should be complete.
2) By fixing it on any ferromagnetic surface
that does not heat up. For example, a
refrigerator.
®
Content:
1 Momo Glow
®
1 USB cable
1 magnetic holder
1 3M adhesive
®
switch
usb port
metal handle
Need help?
Do you have a question about the MOMO GLOW and is the answer not in the manual?
Questions and answers