Do you have a question about the ELIPSE and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Mibrasa ELIPSE
Page 1
The Craftsmen of Fire! ELIPSE ROTISSERIE Instruction manual Read all instructions before installing and using the Mibrasa Elipse rotisserie. Save these instructions ®...
1. WARNINGS 1.1 Preliminary warnings 1.2 Installation warnings 1.3 Usage warnings We invite you to experience Mibrasa grill cooking for yourselves. Cook and create in ® 1.4 Cleaning warnings a way that awakens your taste buds and reminds us of the beauty in simplicity.
® this equipment. The Mibrasa Elipse rotisserie is only for cooking food, any other use other than this ® can cause risks to the user. Save these instructions and have this manual within reach for future queries.
While carrying out maintenance work, the operator in charge must wear the necessary PPE required to perform the task. DO NOT perform maintenance functions if the equipment is hot. DO NOT use replacement parts that are not from Mibrasa ®...
2.2 RST70 2. Technical information 2.1 Mibrasa Elipse rotisserie models ® Rotisserie surface area RST70 7 chickens per spit Total capacity of 70 chickens 1100 mm x 10 spits INCLUDED ACCESSORIES TECHNICAL DETAILS • Spit rod [10] Reference RST70 •...
3. Mibrasa ELIPSE Rotisserie description ® 3.1 Main parts of the ELIPSE rotisserie Exhaust system Thermal insulation Window access 180° Orbital rotation system Refractory wall Rotary spit Combustion area Door access 90° Ash collector GN1/1 and GN 2/4 tray Holding drawers for spits 3.2 Mibrasa...
3.3 Mibrasa control panel ® The Mibrasa control panel has two functions: direct control and auxiliary control. ® The direct control function is exercised through the buttons, selectors and emergency stop. It is responsible for the movement of the spits and the lighting inside the rotisserie.
D marks the safety distance required between the rotisserie and other elements STABLE Non-flammable elements Flammable elements LEVEL D (mm) NON-COMBUSTIBLE 4.4 Exhaust hood Mibrasa recommends an extractor hood with the following technical characteristics: ® Reference Width Depth Working height Exhaust flow rate 4.2 Connection...
5. Instructions of use 5.3 Lighting Open the lower door and leave the top window open for increased air flow. Place Mibrasa ® Ecofire lighters evenly over the charcoal. Once 60% of the charcoal is on fire and have turned into embers, Read section 1.3 Usage warnings...
5.5 Top window The top window has an opening from 0° to 180°, which can hold position at any point within this TPC1 TYPE CONTROL FUNCTION range. Orbital spit rotation Open the window: Green button/top • For easier air entry when lighting up BUTTON Orbital spit rotation •...
Half open door: 5.9 Ash collector • Reduce air entry • For easy access to handle the spits The removable drawer holds the ash produced from • Reduce grease/sauce spatters the burning process, providing easy cleaning. Closed door To remove the drawer, open the lower door and •...
6. Cleaning instructions Read section 1.4 Cleaning warnings 6.1 Daily cleaning 6.1.1 Spit rods and accessories Clean the spit rods and accessories by hand with water and dish detergent. Small accessories can be washed in a dishwasher. 6.1.2 GN trays Wash GN trays in a dishwasher GN trays can also be washed by hand with water and dish detergent.
6.2 Weekly cleaning 6.1.4 Elipse rotisserie interior 6.2.1 Charcoal grids Open the top window and lower door, remove the spits, accessories and the GN trays for easy access. Clean the entire inside area with a sponge and degreaser. Clean the inside of the top window and lower door with a damp cloth and cleaning products (ammonia based).
6.2.2 Burner 6.2.3 Firebreak Wash the firebreak in a dishwasher. Open the top window and lower door, remove the spits, accessories and the GN trays for easy access. The firebreak can also be washed by hand with water and dish detergent. With a metal brush, remove ash residue from the burner so it falls into the ash collector.
6.3 Monthly cleaning 6.3.1 Elipse rotisserie exterior Disconnect the equipment and move to a place where all sides are accessible. Clean the accessible exterior parts of the rotisserie including the ceiling, using a damp cloth and degreaser or suitable cleaning products (ammonia based).
7. Maintenance instructions Read section 1.5 Maintenance warnings The RST70 rotisserie contains many components that could require maintenance. This manual only contains maintenance instructions that can be carried out by the user. Maintenance instructions that need to be carried out by a qualified technician are not explained in this manual.
7.1.2 Refractory brick replacement on rear wall The rear wall refractory bricks are found at the back of the rotisserie. To carry out this task move the rotisserie forward for extra space to access the rear side. 1- Remove the back and top casing panel using a 4mm Allen key. 2 - Remove the thermal insulation from the top and back side using a Phillips screw driver.
7.1.4 Greasing main motor chain The main motor chain is located on the right hand side of the rotisserie. To carry out this task move the rotisserie forward for extra space to access the right hand side of the rotisserie. Lubricate the chain at least once a year.
7.2 Mechanic/technician-level maintenance 7.1.5 Greasing rotary spit chain These instructions are directed to those with mechanical or technical training. The rotary spit chain is located on the left hand side of the rotisserie. A mechanic or technician is required for the following cases: •...
Mibrasa ® (III) those defects not immediately notified within the warranty period stated above, (IV) those defects or damage due to negligence not attributable to Mibrasa , or an ® accident, misuse, improper installation, mishandling or abnormal conditions of...
Page 23
The Craftsmen of Fire! Factory, Office and Showroom +34 972 601 942 C/ Joan Rovira i Bastons, 26 17230 mibrasa@mibrasa.com Palamós (Girona) Spain www.mibrasa.com Version 4.25...
Need help?
Do you have a question about the ELIPSE and is the answer not in the manual?
Questions and answers