Download Print this page

STO N SHO SNS 3 Installation Procedures Manual

2005-2009 mustang v-6 and gt

Advertisement

Quick Links

Installation Procedures
2005-2009
Mustang V-6 and GT
SNS 3
WARNING: Must remove the front plate PRIOR to entering
an automated car wash or DAMAGE will occur!

Advertisement

loading
Need help?

Need help?

Do you have a question about the SNS 3 and is the answer not in the manual?

Questions and answers

Summary of Contents for STO N SHO SNS 3

  • Page 1 Installation Procedures 2005-2009 Mustang V-6 and GT SNS 3 WARNING: Must remove the front plate PRIOR to entering an automated car wash or DAMAGE will occur!
  • Page 2 Warranty only covers manufacture defects and STO N SHO LLC is not responsible for damages as a result of driving your vehicle. Warning: Please read directions completely before starting. If you have any questions, please contact STO N SHO LLC before beginning your installation.
  • Page 3 Verify alignment and repeat as necessary. Once leveled plate will remain level. Congratulations! You have just installed the STO N SHO (Patented) front license plate mounting system.
  • Page 4 STO N SHO LLC or its representative will, at its sole option and expense, repair or replace any product found to be defective. If product to be replaced via mail, STO N SHO LLC will return the repaired or replaced unit to you via its usual shipping method from the factory to your address in the United States of America or Canada only.
  • Page 5 For the name of your nearest authorized STO N SHO dealer, contact: STO N SHO LLC at (408) 776-4080 or go to www.stonsho.com.
  • Page 6 Fig 2 (V-6) Fig 2a (GT)
  • Page 7 Fig3 (V-6) Fig 3a (GT)
  • Page 8 Fig 4 (V-6 & GT) Fig 5 (V-6 & GT)