Page 2
(2) Water pH : 7.2 -7.6 (3) Chlorine level: pool is maintained according to the pool manufacturer’s instructions. (Recommended Chlorine level: 2-4 ppm) Note: Failure to maintain the pool according to the recommended operating conditions could prevent the robotic cleaner from functioning properly. NEPTUNE i40 | ROBOTIC POOL CLEANER...
CAUTION: Operating the cleaner out of water causes immediate severe damage and results in loss of warranty. NO SWIMMING WHILE THE ROBOT IS IN THE POOL NEPTUNE i40 | ROBOTIC POOL CLEANER...
AC power (2) and supplies low voltage and commands to the robotic cleaner through the outlet socket. The power supplies feature a control panel with indicators: a. On/Off (all models) b. Full filter indicator (only some models) c. Bluetooth indicator (only some models) NEPTUNE i40 | ROBOTIC POOL CLEANER...
(1) Unscrew the outlet locker that secures the outlet cover. (2) Remove the water outlet cover (3) Clean any hairs, dirt, or debris. (4) Return the outlet locker resecuring the outlet cover. NEPTUNE i40 | ROBOTIC POOL CLEANER...
Propeller is broken or seized due to accumulation of hair: (1) Unscrew the outlet locker on the top outlet. (2) Check if the propeller is broken or needs to be cleaned. NEPTUNE i40 | ROBOTIC POOL CLEANER...
Warranty Service: To obtain warranty service for this unit please contact the closest Authorized Service Center by going to: the www.bwt.com/en-us/ then choose Pools then choose Customer Service then select Authorized Service Centers or alternatively you can contact (833) 4MY-AQUA (833) 469-2782. Or you can email us at: service@bwtpool.us NEPTUNE i40 | ROBOTIC POOL CLEANER...
Page 8
Your ACTIVATION CODE is found on the silver label XXXX - XXXX inside the robot Control your NEPTUNE pool cleaner with BWT Best Water Home App...
Need help?
Do you have a question about the i40 and is the answer not in the manual?
Questions and answers