Page 1
5000 USER MANUAL ELECTRONIC RFID & KEYPAD LOCKS ZEPHYR LOCK 1. Summary 1.1 What are 5000 Locks? 5000 locks are the RFID and keypad integrated locker lock can operated by either RFID Cards or password keypads. Digital Button (0 – 9) Power Button Lock Button/Unlock Button 1 ...
Page 2
1.2 RFID Card Types and Functions Item Card Types Functions User Card This card can open registered lock only Data Card Read the open lock record and lock information Time Change Card Setup lock clock Setup Card Write preset information into lock Management Card Open any lock does not clear the registered card/password Control Card ➊ Open any lock ➋ Clear registered card/password Authorization Card Authorize ELMS software and locks 1.3 Lock Operation System Composition Lock Operation System consisted of PC based Electronic Lock Management System (ELMS) software and RFID Card reader/writer, and enable the operator to issue User card, setting the lock information, lock status and to produce the statistical report. System Requirements: * OS: Windows XP/Windows7/Windows8 * USB port for Card reader/writer interface ...
2.2.3 Programmable for multiple users per locker 3. Lock Operations ‐‐ Storage Personal belongings 3.1 Shared Use Mode 3.1.1 User approaches the locker; locker door is open and no light is flashing, which means the locker is available 3.1.2 User opens the locker door; places device(s) inside the locker, then closes the door. 3.1.3 Presses the Power Button, Green LED starts flashing for 6 seconds, the lock is ready to accept user input by scan user RFID card or key code combination. 3.1.4 User then refocuses on the keypad and begins entering his own 4‐digit pass code. 3.1.5 As he presses the first number button, the green LED flashing turns off. 3.1.6 After the fourth number is entered, and presses the Lock Button within 5 seconds, 3.1.7 The red LED flashes once and the bolt extent out the lock. 3.1.8 The red LED continues to flashing red, showing that the locker is in use ‐‐ Take Personal belongings 3.1.9 User approaches the locker, press the Power Button and start enter the 4‐digit pass code then press the Unlock Button. 3.1.10 Red LED turns off and bolt retracted. 3.1.11 User opens the locker door and takes out his personal belongings then walk away, keep the ...
Page 4
3.2.5 All LED turns off showing that the locker is in use. 4. Lock Setting and Emergency open 4.1 Lock Setting 4.1.1 Use the ELMS software to pre‐set the lock’s function, then issues Cards. 4.1.2 Swipe the Authorization Card. 4.1.3 Swipe the Setup Card, Lock setting is now completed. 4.2 Emergency open In case user forgot the password, or lost his User card 4.2.1 Operator can swipe the Management Card to open the lock. 4.2.2 Or swipe the Control Card to open the lock. Note: If the lock worked in Shared Use mode, after swiped the Control Card, the registered card / password will be clear 4 ...
Page 5
5. Indication of sound and light 5.1 Shared Use Mode Operations 5.1.1 All the pass code is 4‐digit 0 – 9. 5.1.2 Key tone: 1 short beep. 5.1.3 Unlock or Lock : 1 short beep. 5.1.4 Less than 4‐digit are entered presses Lock Button: 4 short beeps. 5.1.5 More than 4‐digit are entered presses Lock Button: 3 short beeps. 5.1.6 Available status: No LED lights. 5.1.7 In use status: Red LED flashes. 5.1.8 Power Button: 1 short beep, green LED flashing 5 seconds. 5.2 Permanent Use Mode operations 5.2.1 Swipe User Card: 1 short beep, green LED flashing once. 5.2.2 Swipe Management Card: 1 short beep, green LED flashing 5 seconds. 5.2.3 Swipe Control Card: 1 short beep, green LED flashing 5 seconds. 5.2.4 Swipe Data Card: Start Reading: 1 short beep, Finish Reading: 2 short beeps, green LED flashing. 5.2.5 Swipe Time Change Card: 2 short beeps. ...
Need help?
Do you have a question about the 5000 and is the answer not in the manual?
Questions and answers