Subscribe to Our Youtube Channel
Related Manuals for iPort CONNECT PHONE 14 13
Summary of Contents for iPort CONNECT PHONE 14 13
- Page 1 CONNECT PHONE CO NN ECT P H ON E CAS E 72334 - CONNECT PHONE Case 14 13 72372 - CONNECT PHONE Case 15...
- Page 2 CO NN ECT P H ON E CAS E IPORT CONNECT Pro Payment Processor Manual Thank you for purchasing the all new IPORT CONNECT Platform. We hope you enjoy this revo- lutionary new system and if at any time you need...
- Page 3 CONNECT PHONE CO NN ECT P H ON E CAS E IPORT CONNECT Phone Case 1. Remove the Phone Case (A) from its packaging, and remove the Lightning or USB-C Dongle (B) from inside the bottom of the case. Set aside.
- Page 4 CONNECT PHONE CO NN ECT P H ON E CAS E 2. Insert the iPhone into the Phone Case, first inserting the bottom of the phone and then pressing down into the top of the Case.
- Page 5 CONNECT PHONE CO NN ECT P H ON E CAS E 3. Insert the Lightning or USB-C Dongle (B) into the bottom of the Phone Case (A) making sure to seat the Dongle into the Case fully. NOTE: Orient the connector with the thumbnail grooves facing up and the vertical grooves facing down.
- Page 6 CONNECT PHONE CO NN ECT P H ON E CAS E 4. To begin charging, continue to Step 1 of the Dock setup.
- Page 7 CONNECT PHONE CO NN ECT P H ON E CAS E Setup and charging with the CONNECT Dock 1. Remove the CONNECT Dock and power supply from the packaging.
- Page 8 CONNECT PHONE CO NN ECT P H ON E CAS E 2. Turn over the CONNECT Dock and rotate the cable retention clip toward the left.
- Page 9 CONNECT PHONE CO NN ECT P H ON E CAS E 3. Insert the power supply barrel connector into the CONNECT Dock, making sure to first run the cable under the cable retention clip and then into the barrel connector.
- Page 10 CONNECT PHONE CO NN ECT P H ON E CAS E 4. Position the power cable around the retention loop, rotate the cable retention clip to the right, and lock in the power cable. Rotate the Dock back and place it in your desired location.
- Page 11 CONNECT PHONE CO NN ECT P H ON E CAS E 5. Place the phone case onto the dock and verify that the case is charging the iPhone.
- Page 12 CONNECT PHONE CO NN ECT P H ON E CAS E Removeing the iPhone from the PayCase 1. To uninstall the iPhone, remove the Lightning Dongle by sliding it out from the bottom of the Case.
- Page 13 CONNECT PHONE CO NN ECT P H ON E CAS E 2. Remove the Lightning or USB-C Dongle altogether before removing the iPhone from the Case.
- Page 14 CONNECT PHONE CO NN ECT P H ON E CAS E 3. Press the top of the iPhone from behind the case outward enough to clear the edge, then pull the iPhone up and out of the case.
Need help?
Do you have a question about the CONNECT PHONE 14 13 and is the answer not in the manual?
Questions and answers