Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Acer AcerSwitch ALW-6005
Summary of Contents for Acer AcerSwitch ALW-6005
- Page 1 ALW-6005 AcerSwitch 5-port 10/100Mbps Switch User's Guide...
- Page 2 Furthermore, Acer Netxus Inc.reserves the right to revise this publication and to make changes from timeto time in the contents hereof without obligation to notify any person ofsuch revision or changes.
-
Page 3: Table Of Contents
Table of Contents Chapter 1 Overview Product goal Product configuration Chapter 2 Make your Switch ready Installing the Switch Connecting to the external power supply Installing switch as a stack with stacking kits Connecting to computers LEDs interface overview Chapter 3 Apply a feasible networking Connecting a hub/switch to normal port How to use stacking kits Application... -
Page 4: Chapter 1 Overview
LAN environment. 1.1 Product goal AcerSwitch ALW-6005 provides high-speed and easy access to the LAN and Intranet both for SOHO and corporations. It allows data transmissionat speeds of 10 Mbps or 100 Mbps. It provides an easy... -
Page 5: Chapter 2 Make Your Switch Ready
2. Make Your Switch Ready This chapter will guide you through how to install the AcerSwitch ALW- 6005. It includes procedures for connecting to the external power supply, installing the Switch on your working surface, connecting the switch to your computer, and guidelines to see if it works well. Before setting up your Switch, please take notes of the front and rear panel of this Switch, as shown in Figure 2-1 and 2-2. -
Page 6: Connecting To The External Power Supply
2.2 Connecting to the external power supply Carefully unpack the AcerSwitch ALW-6005 and it's accessories. For the first time that you use this Switch, please make sure there is all the same as the checking list in the package. The procedure for connecting to the power will be: 1. -
Page 7: Installing Switch As A Stack With Stacking Kits
2.3 Installing switch as a stack with stacking kits If you are installing more than one SOHO series together, please use the stacking kits to fasten the stack tightly as the following procedure. 1. Place the Hub/Switch on the top of SOHO stack. 2. -
Page 8: Leds Interface Overview
Figure 2-4-1 Connecting to computers 2.5 LEDs interface overview You can observe the LEDs status to see if the hub works fine. Themeanings of LEDs are summarized as Table 2-5-1. Table 2-5-1 LEDs definition... -
Page 9: System Indicators
2.5.1 System indicators PWR: When the power is connected rightly, the PWRLED will be lit on Green. If the LED is not lit on, then you should check the connection ofyour power and the outlet of power. Fan Err.: When the fan malfunction at work, then the Fan Err LED will be lit up and blink. -
Page 10: Chapter 3 Apply A Feasible Networking
3. Apply a feasible networking This chapter describes the network topology for hybrid 10 Mbps and 100Mbps networks, cabling requirement for connections, the interoperability between hubs and switches. And tell you how to use the ALW-6005 to expand your port numbers. You can use the ALW-6005 as a backbone switch in small and medium size LAN environment, and for the purpose of expanding your port number you can connect another hub/switch with it's uplink port to... -
Page 11: How To Use Stacking Kits
3.2 How to use up-link port With up-link port you can use it to cascade to another switch to expand your network. Please refer to the following procedure. 1.Use one end of UTP/STP to connect to the up-link port of ALW-6005 2.Use the other end to connect to the normal port of the new switch 3.Make sure the LNK LED is lit then it will work normally. -
Page 12: Chapter4 Trouble Shooting
4. Trouble shooting S y m p t o m s Possible Reason S u g g e s t i o n All LEDs are off . The hub is not receiving 1. Check if the AC power cord DC power. -
Page 13: Appendix: Specification
Appendix: Specifications Physical Specification Ports 5 dual-speed 10 BASE-T/100 BASE-TX RJ-45 ports 1 Up-Link 10 Base-T/100 Base-TX RJ-45 ports Dimension 247 (Width) x 163(Depth) x 45mm(Height) Weight 1.5 Kg Power External switching power supply Input: 100~120/220~240V AC,50-60Hz Output: DC 5V LEDs indicator Power, fan error, LNK/ACT, FDX for each port and Speed 10/100Mbps Switch Processing Scheme... -
Page 14: Product Limited Warranty
Product Limited Warranty Acer Netxus Incorporated (ANI) warrants its product to be free from defects inmaterials and workmanship, under normal use and service, for the following lengths oftime from the date of purchase from ANI or its Authorized Resellers. Network adapter card... - Page 15 Contact us: Acer UK Limited Acer Computer International Ltd. Tel: 44-1628-533422 Taiwan Branch Fax: 44-1628-524071 Tel: 886-2-2713 9099 ext.7293 http://www.aceruk.co.uk...
- Page 16 100% Recyclable Paper 49.23017.001 P/N: Acer Netxus Inc. A Communications Company of Acer...
Need help?
Do you have a question about the AcerSwitch ALW-6005 and is the answer not in the manual?
Questions and answers