D-Link SW-A11KT Quick Installation Manual

Quick Installation Guide
SW-A11KT
Water Leak Sensor Starter Kit
Setup Code
This is a backup of your device' s
Setup Code. Please keep it as future
reference for your device.
2025/03/12 Ver 1.00(US)_90x130
What's in the Box
Master Wi-Fi Water Sensor Remote Water Sensing Pod
(SW-A1)
3 ft Extension Cable with Extension Cable Clips
1.5 ft Water Sensing Cord
Pod pre-installed with Quick Installation Guide
2 x AAA batteries
Alerts
When water is detected from any of the
sensors connected to your whole home
water leak system, ONLY the Master Plug-
in Smart Wi-Fi Water Leak Sensor (SW-A1)
will sound an audible alarm and an alert will
be sent to your smartphone notifying you as
to which unit was triggered.
Simple Setup
Please set up your device before mounting it.
1
/
(SW-A2)
2
/
3
/
Get the AQUILA Pro AI app on the App
Store or on Google Play. Launch the
app, then Sign In or Create a New
Account.
AQUILA PRO AI
Power on the device and wait for the
Status LED to flash orange.
Note: Make sure that your mobile
device's Bluetooth is on.
Place your device next to your mobile
device. A prompt will appear - tap Add
Device, then follow the app instructions.