Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Ronix 8626
- Page 1 CORDLESS FAN 20V 8626...
-
Page 3: Technical Specification
TECHNICAL SPECIFICATION 8626 Model Battery Chemistry lithium-ion Battery Voltage Battery Capacity 2000mAh Low: 890RPM No-Load Speed Mid:1460RPM High:1890RPM Blowing Speed 3.567m/s Mid speed: 60.7dB Noise Level High speed: 65dB Blowing Volume MAX 14m³/min Running Time 2.8h(High speed) Weight 2.76Kg (with 1pc battery) -
Page 4: Part List
PART LIST Mesh Front Shell Rear shell Battery Cartrige Speed Adjustable Knob Frame Rubber Leg GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. -
Page 5: Electrical Safety
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. - Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. - Page 6 Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. - Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
-
Page 7: Battery Safety Instructions
- Maintain machines. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the machines operation. If damaged, have the machine repaired before use. Many accidents are caused by poorly maintained machines. - Keep cutting tools sharp and clean. - Page 8 6- Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). 7- Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. 8- Be careful not to drop or strike battery.
- Page 9 WARNING: 1- To keep the Li-ion working, it must not be charged at temperatures below 0 °C or above 45 °C. 2- If the battery pack temperature is above 45 °C or below 0 °C, the battery pack cannot be charged. The charger is green after connect the battery pack.
-
Page 10: Change The Speed
To power off the fan, please press the power button (3) again. CHANGE THE SPEED This model has three speed to adjust. Press the fan speed adjustment button (5) to change speed. Fan work time adjustment To adjust the fan work time, please press the fan work time adjustment button (4), it can select from 2 hours, 4 hours and 8hours.
Need help?
Do you have a question about the 8626 and is the answer not in the manual?
Questions and answers