Page 6
Montage nach abZ (in Deutschland zu beachten) ABS-Lock® SYS II+IV Z-14.9-688 Installation according to abZ (Observe in Germany) ABS ForceLimiter 2 – 10 Gerades System / straight system ABS ForceLimiter 2 – 10 Mit Kurven / with curves...
Page 7
Montage nach EN 795:2012 ABS-Lock® SYS II+IV DIN EN 795 Installation according to EN 795:2012 ABS ForceLimiter max. Gerades System (starres System) / straight system (stiff system) ABS ForceLimiter max. Mit Kurven (starres system) / with curves (stiff system) ABS ForceLimiter max.
Page 8
ABS-Lock® SYS II+IV SYS IV SYS II ABS TI-FlexCurve Seite / Page ABS TI-FlexCurve Seite / Page ABS UniSlide SY-UNISLIDE ABS Systemschild ABS specification plate Seite / Page ABS Gabelkopf (aufgewalzt) / ABS clevis (rolled on) ABS TI-Bracket-Light Seite / Page Seite / Page ABS SP Seite / Page...
Page 9
ABS-Lock® SYS II+IV ABS TI-FlexCurve Seite / Page ABS TI-Bracket-Light Seite / Page OPTIONAL ABS TI-Bracket Seite / Page OPTIONAL ABS CompactForce ABS ForceLimiter Seite / Page Seite / Page ABS Spannelement ABS tensioning element Seite / Page...
Page 10
10 | ABS-Lock® SYS II+IV SYS IV SYS II ABS TI-Bracket-Light Seite / Page ABS CompactForce Seite / Page ABS ForceLimiter Seite / Page ABS SkyRoll SY-SKYROLL max.
Page 11
ABS-Lock® SYS II+IV ABS Gabelkopf (aufgewalzt) / ABS clevis (rolled on) Seite / Page ABS TI-FlexCurve Seite / Page OPTIONAL ABS TI-Bracket Seite / Page ABS ForceLimiter Seite / Page Video...
Page 12
12 | ABS Systemschild / ABS specification plate SY-1009 Biegen per Hand Bend by hand 50 Nm 70 Nm 45 Nm...
Need help?
Do you have a question about the ABS-Lock SYS II+IV and is the answer not in the manual?
Questions and answers