SAFETY INSTRUCTIONS BEFORE ASSEMBLY Layout all components and hardware. Check all parts are included and undamaged. Should anybody intends to install or use this monitor arm, please read and understand this manual carefully. WARNING This product contains small items that could be a choking hazard if swallowed. KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD.
Page 5
STEP 2: Arm Installation The screw are used to adjust the tightness of the connection between the base and the bracket arm to avoid the arms from shaking.
Page 6
OPTION A: Flat Back Monitor Attach the Monitor Monitor Monitor and secure Do not tighten the screws excessively or your monitor might be damaged. OPTION B: Curved / Recessed Back Monitor monitor monitor monitor...
Page 7
Slide the monitors onto the head of arm. Important Notice: The pressure of the gas spring is initially set to an intermediate value. So when the monitor hangs, make sure to hold it with both hands and don't let it drop suddenly.
Page 8
need to adjust tension in upper arm (1) . Situation 1: Arm falls down Upper Arm with monitor falls down and fails to stay where intended. Solution: Turn the inside screw counter clockwise (“+”direction) to increase gas spring tension until the arm can stay as intended.
Page 9
Remove Cable Cover Remove two keys rst, then remove the cover Attach Cable Cover Insert the cover rst, then install the two keys...
Page 10
Adjust as Desired Adjust monitor position and rotation. Tilt +90° Swivel Rotation ±180° Height -45° Note: To ensure stability, the tightness of the rotating axis has VESA plate. sides of it with both hands, and rotate vigorously. If that doesn't work out, please do not hesitate to ask for our help. WARNING: desk! DESK...
Page 11
CAUTION AND MAINTENANCE: • Never allow children to climb, stand, hang, or play on any part of monitor or stand. • This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. •...
Need help?
Do you have a question about the FWP-MOUNT-1-49 and is the answer not in the manual?
Questions and answers