OPPO Enco Air2i Manual

Bluetooth pairing

When the charging case is opened for the first time, the earphones automatically enter pairing mode;

• Connect a new device: Remove the earphones and press and hold both ears for 4 seconds to enter pairing mode.
  

Function usage

You can customize the control functions of the left and right earphones on your mobile phone.
For detailed support information, please refer to the official website: www.oppo.com.

ColorOS system

Update the wireless earphones to the latest version; On the Bluetooth interface of the phone, click on "OPPO Enco Air2i>Earphone Function".

Android system

After searching for the "Huanlu" app in the app store or scanning the QR code on the right to download and install it, you can use the corresponding functions in the app.

Restore factory settings

Simultaneously press and hold the left and right earphones for 15 seconds until you hear a beep, triggering the 'factory reset' button..

Touch function

Charge

Earphone charging
Put the earphones into the charging case and close the cover before charging.

Charging box charging

Use a USB-C charging cable to charge the charging case.
*The charging indicator light is white, flashing during charging, and constantly on after charging is completed. When the charging case is low, the white light flashes. Please charge it in time.