Download
Share
Print this page
AEG L7FEN94CS User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L7FEN94CS
  6. User manual
AEG L7FEN94CS User Manual

AEG L7FEN94CS User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
L7FEN94CS
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

loading
Need help?

Need help?

Do you have a question about the L7FEN94CS and is the answer not in the manual?

Questions and answers

Related Manuals for AEG L7FEN94CS

Summary of Contents for AEG L7FEN94CS

  • Page 1 L7FEN94CS User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    1369/2017........................39 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    – working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments; areas for communal use in blocks of flats or in – launderettes. Do not exceed the maximum load of 9 kg (refer to the •...

  • Page 5: Electrical Connection

    ENGLISH • Do not install or use a damaged • Do not touch the mains cable or the appliance. mains plug with wet hands. • Do not install or use the appliance • Do not pull the mains cable to where the temperature can be less disconnect the appliance.

  • Page 6: Installation

    • Do not touch the glass door while a • Disconnect the appliance from the programme is in operation. The glass mains electrical and water supplies. can get hot. • Cut off the mains electrical cable close to the appliance and dispose of 2.5 Service...
  • Page 7 ENGLISH 6. Put the front polystyrene packaging element on the floor under the appliance. • A (FRONT) = Front of the appliance Make sure not to damage • B (BACK) = Rear of the appliance 10. Remove the adhesive strip from the the hoses.

  • Page 8: Positioning And Levelling

    Make sure that the appliance does not touch the wall or other units. 2. Loosen or tighten the feet to adjust the level. WARNING! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level.

  • Page 9: The Inlet Hose

    ENGLISH 3.3 The inlet hose The red sector in the window «A» shows this fault. 1. Connect the water inlet hose to the back of the appliance. 2. Position it toward left or right depending on the position of the water tap.

  • Page 10: Product Description

    5. Without the plastic hose guide, to a sink spigot - Put the drain hose in Make sure that the drain the spigot and tighten it with a hose end is not immersed in clamp. Refer to the illustration.

  • Page 11: Appliance Overview

    ENGLISH and reduce creases in dry fabrics so • Thanks to the Soft Plus option, the they need little ironing. fabric softener is uniformly spread out The Plus Steam option, finishes every in the laundry and deeply penetrates cycle with gentle steam that relaxes the fabric fibres favouring a perfect the fibres and reduces fabric creasing.

  • Page 12: Control Panel

    5. CONTROL PANEL 5.1 Control panel description 11 10 Programme dial Extra rinse touch button (Extra Display Spoelen) Energy saving touch button (Eco) Delay start touch button (Startuitstel) Time saving touch button (Tijd Super steam touch button (Plus Besparen)
  • Page 13 ENGLISH 5.2 Display Maximum load indicator. The icon flashes during laundry load esti- mation (refer to "PROSENSE load detection" paragraph). Maximum laundry indicator. It flashes when the laundry load exceeds the maximum declared load of the selected programme. Delay start indicator. Door locked indicator.

  • Page 14: Dial And Buttons

    Temperature indicator. The indicator appears when a cold wash is set. Spin speed indicator. Rinse hold indicator. Extra silent indicator. Pre-wash indicator. Stain indicator. Extra rinse indicator. 6. DIAL AND BUTTONS 6.1 AAN /UIT 6.3 Temp.°C Pressing this button for a few seconds...
  • Page 15 ENGLISH The door stays locked. The drum Use this option to add a prewash turns regularly to reduce creasing. phase at 30 °C before the washing You must drain the water to unlock phase. the door. This option is recommended for Touch Start/Pauze button: the heavily soiled laundry, especially if appliance performs the spinning...
  • Page 16 6.10 Skipping phase button A small laundry load helps to (Extra) reach better results. By touching this button you can set: 6.8 Eco • Only rinse at first touch. The washing programme starts from the rinsing The Eco option reduces the energy phase by skipping the wash phase.

  • Page 17: Programmes

    ENGLISH 7. PROGRAMMES 7.1 Programme Chart Washing programmes Programme Programme description Washing programmes White cotton and coloured cotton. Normal, heavy and light soil. Katoen Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, the programme Katoen at 60 °C and the programme Katoen at 40 °C with the option are respectively the «Standard 60°C cotton pro- gramme»...
  • Page 18 Programme Programme description White cotton items. This programme removes micro-organ- isms thanks to a washing phase with the temperature main- Anti-Allergie tained above 60°C for several minutes. This helps remove germs, bacteria, micro-organism and particles. An additional rinsing phase ensures a proper removal of detergent residues and pollens/allergenic items.
  • Page 19 ENGLISH Programme Programme description Maintenance cycle with hot water to clean and freshen the drum and to remove residue that may cause odour. For the Machine Clean best result use this cycle once a month. Before running this cy- cle, remove all items from the drum. In the washing phase compartment of the detergent dispenser, put the flap of the compartment in upward position.
  • Page 20 Programme Default temperature Reference spin Maximum load Temperature range speed Spin speed range 40 °C 1200 rpm 9 kg 60 °C - Cold 1200 rpm - 400 rpm Jeans 1200 rpm 60 °C 1200 rpm - 400 rpm Machine Clean 1) Washing programme.

  • Page 21: Woolmark Apparel Care - Blue

    ENGLISH ■ ■ ■ ■ ■ Soft Plus 1) This option is not available with temperature lower than 40 °C. 2) This option is not available with a temperature lower than 30 °C. 3) If you set the shortest duration, we recommend that you decrease the load size. It is possible to fully load the appliance, however the washing results can be less satisfactory.

  • Page 22: Settings

    9. SETTINGS 9.1 Child Lock completed, touch the Extra spoelen and the Startuitstel buttons simultaneously With this option you can prevent that the for about 6 seconds. children play with the control panel. If you deactivate the • To activate/deactivate this option,...

  • Page 23: Loading The Laundry

    ENGLISH 10.2 Loading the laundry Flap for powder or liquid 1. Open the appliance door. detergent. 2. Shake the items before you put them in the appliance. Always follow the 3. Put the laundry in the drum, one item instructions that you find on at a time.

  • Page 24: Setting A Programme

    4. To use liquid detergent, turn the flap Make sure that the flap does not cause a down. blockage when you close the drawer. 10.5 Setting a programme 1. Turn the programme dial to select the desired washing programme. The...

  • Page 25: Starting A Programme With The Delay Start

    ENGLISH After touching the Start/Pauze button, The drain pump can operate the maximum declared load indicator shortly before the appliance goes off, the indicator flashes, the fills water. ProSense starts the laundry load detection: 10.7 Starting a programme 1. The appliance detects the load in the with the delay start first 30 seconds: the indicator 1.

  • Page 26: Programme Phase Indicators

    10.9 Programme phase If the ProSense phase is indicators already carried out and the water filling is already When the programme starts the indicator started, the new programme of the running phase flashes and the starts without repeating other phase indicators are steady on.

  • Page 27: Stand-By Option

    ENGLISH 2. Touch the Start/Pauze button: The door unlocks and the indicator goes off. • If you have set , the appliance drains the water and spins. 1. Press the AAN /UIT button to • If you have set , the appliance deactivate the appliance.

  • Page 28: Stubborn Stains

    • Do not wash white and coloured We recommend that you pre-treat these items together. stains before you put the items in the • Some coloured items can discolour appliance. with the first wash. We recommend Special stain removers are available. Use...

  • Page 29: Care And Cleaning

    ENGLISH 11.5 Water hardness To find out the water hardness in your area, contact your local water authority. If the water hardness in your area is high Use the correct quantity of water or moderate, we recommend that you softener. Follow the instructions that you use a water softener for washing find on the packaging of the product.

  • Page 30: Cleaning The Detergent Dispenser

    Always follow the position. instructions that you find on the packaging of the product. Do not clean the drum with acidic descaling products, scouring products containing chlorine or iron or steel. For a thorough clean: 1.
  • Page 31 ENGLISH Regularly check the drain pump filter and make sure that it is clean. Clean the drain pump if: • The appliance does not drain the water. • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump.

  • Page 32: Cleaning The Inlet Hose And The Valve Filter

    Authorised Service Centre. When you drain the water with the emergency drain procedure, you must 10. Clean the filter under the water tap. activate the drain system again: a. Put 2 litres of water in the main wash compartment of the detergent dispenser.

  • Page 33: Emergency Drain

    ENGLISH 12.9 Emergency drain If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate the drain system again: 1.

  • Page 34: Possible Failures

    • - The appliance does not fill with • - The mains supply is unstable. water properly. Wait until the mains supply is stable. • - The appliance does not drain • - No communication between the water. electronic elements of the appliance.
  • Page 35 ENGLISH Problem Possible solution • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. • Make sure that the water tap is not clogged. The appliance does not •...

  • Page 36: Emergency Door Opening

    Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to The appliance makes an "Installation instruction". unusual noise and vi- • Make sure that the packaging and/or the transit bolts are brates. removed. Refer to "Installation instruction".

  • Page 37: Consumption Values

    ENGLISH 2. Disconnect the mains plug from the 5. Take out the laundry and then close mains socket. the appliance door. 3. Open the filter flap. 6. Close the filter flap. 4. Pull the emergency unlock trigger downward once. Pull it downward once again, keep it tensed and, in the meanwhile, open the appliance door.

  • Page 38: Technical Data

    Programmes Load Energy Water Approxi- Remain- (kg) consump- consump- mate pro- ing mois- tion (kWh) tion (litre) gramme ture (%) duration (minutes) Standard cotton programmes 0.81 Standard 60°C cotton 0.56 Standard 60°C cotton 0.50 Standard 40°C cotton 1) At the end of spin phase.

  • Page 39: Accessories

    Read carefully the instructions supplied top of the washing machine only by with the accessory. using the correct stacking kit manufactured and approved by AEG. 17. PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION 1369/2017 Product Information Sheet Trade Mark...
  • Page 40 Model L7FEN94CS, PNC 914550479 Rated capacity in kg Energy efficiency class A+++ Energy consumption in kWh per year, based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and partial load, and the consumption of the low-power modes.

  • Page 41: Environmental Concerns

    ENGLISH Airborne acoustical noise emission in db(A) spinning Built in appliance Y/N The information given in the chart above is compliant with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC . 18. ENVIRONMENTAL CONCERNS appliances marked with the symbol Recycle materials with the symbol with the household waste.
  • Page 42 www.aeg.com...
  • Page 43 ENGLISH...
  • Page 44 www.aeg.com/shop...