Installing Batteries In The Remote Control - Samsung CXD1332 Owner's Instructions Manual

I
NSTALLATION
4 4
Connect a third coaxial
cable between the
splitter and the "A"
terminal on the RF (A/B)
switch.
Connect the fourth
coaxial cable between
the terminal on the RF
{A/B) switch and the
terminal on the TV/VCR's
back panel.
Choose the "A" position on the A/B switch to select all non-scrambled channels by remote
control. Choose the "B" position on the A/B switch to select scrambled channels via the
converter box When using the "B" position, tune your TV to the output channel of the
converter box (usually channel 3 or 4)

Installing Batteries in the Remote Control

1
Open the battery
compartment by
pressing down on the
back cover's tab, then
sliding it off.
2
Install two AAA size
batteries (included with
your TV/VCR).
3
Replace the cover.
2 . 4
C T I
H A P T E R W O : N S T A L L A T I O N
TV/VCR Rear
Make sure to match the "+" and
"–" ends of the batteries with the
diagram inside the compartment.
Remove the batteries and store
them in a cool, dry place if you won't
be using the remote control for a
long time.
The remote control can be used up
to about 33 feet (10 meters) from the
TV/VCR
Batteries last for about one year.