Ebyte Electronic Technology Co.,Ltd E101-32 series development board User manual Disclaimer and copyright notice The information in this article, including the URL for reference, is subject to change without notice. The document is provided "as is" without warranty of any kind, including any warranties of merchantability, fitness for a particular purpose or non-infringement, and any warranties of any proposal, specification or sample referred to elsewhere.
E101-32WN4-XS-IE-TB 、 E101-32WN4-PS-E-TB 、 E101-32WN4-XS-UE-TB are three entry-level development boards that use the corresponding modules of the E101-32 series as required. The development board has complete Wi-Fi and Bluetooth low power functions, and most of the pins of the module on the board have been drawn to the two sides of the pin row, developers can easily connect a variety of peripheral devices through jumper, and can also plug the development board into the breadboard for use.
Figure 1 Main components The E101-32WN4-XS-IE module is used as an example Item Firmware Introduction A module based on the E101-32 series. For more information, E101-32 series of modules please download the relevant materials from the official website Reset button.
Most of the pins of the on-board module have been drawn to the development board's row pins. Users can program ESP32 to realize PWM, ADC, DAC, I2C, I2S, SPI and other functions. Note: For specific function instructions, refer to the user manual of the E101-32 series corresponding module. 2.2 Pin definition The following is a front view of E101-32WN4-PS-E-TB as an example: Figure 2.
Ebyte Electronic Technology Co.,Ltd E101-32 series development board User manual 2.3 Notes If you think C15 may affect the use of the development board, you can remove C15 completely. The specific location of C15 on the development board is shown in the yellow section below.
Need help?
Do you have a question about the E101-32 Series and is the answer not in the manual?
Questions and answers