Related Manuals for AirVape ENSO
Summary of Contents for AirVape ENSO
- Page 1 QUICK START GUIDE CHARGE Make sure your battery is charged. FILL Fill the glass tank up to the level indicator. PACK For best results, insert one mesh screen into the bottom of the cup and pack with tobacco lightly (8-12 gr)
- Page 2 TUNE Set the thermodial on the lowest setting (180°) and let it heat up for 5-8 minutes. If vapor production is increase the temp by 15-30° incre- the cha nge to take effect. ENJOY Delight in tasty clouds. Scan the QR code to unlock how-to videos that will help you to master your quickly.
- Page 3 PARTS Thermocap Heating chamber Leather strap Mouthpiece LED indicator Vaporhose-stem Thermodial Vaporhose Watershield Dip tube Glass water tank...
- Page 4 Battery slot Battery handle Blowout valve Speaker USB-C slot Mute/unmute button Water level indicator...
-
Page 5: Accessory List
ACCESSORY LIST 2 Ceramic cups 10 Disposable cups 2 Mesh screens ENSŌ Multi-tool Blowout valve Rubber heat valve Silicone mouthpiece cover Silicone mouthpiece tip... - Page 6 USB-C Charger bric USB-C charging cable Long Brush Short Brush wiping cloth...
- Page 7 BATTERY lever upwards and the battery will be able to be removed.
- Page 8 charging cable to the charging adapter and plug it into the USB-C port on the back of the unit. As long as the battery is inserted, and you has a minimal charge you can use your Ensō plugged in.
-
Page 9: Battery Tips
BATTERY TIPS Please avoid prolonged exposure to direct sun- heating and may become defective. The battery life will vary based on the selected heat setting. At the recommended low setting heat settings may reduce battery life. A small LED indicator on the battery is blinking is fully charged. -
Page 10: Water Tank
WATER TANK to the water level indicator. Water level indicator... - Page 11 VAPORHOSE Connect the vaporhose to the by inserting one end of the hose into the vaporhose-stem.
- Page 12 PACKING For best results please remember to mix your tobacco well, since the juices tend to settle on the bottom of the container, leaving the top part considerably more dry. By mixing up the tobacco with the juices before packing it into your cup/bowl, you get an even juice/tobacco distribution thus ensuring a higher quality flavor and experience altogether.
- Page 13 For best results, insert one mesh screen into the bottom of the cup and pack with tobacco lightly (8-12 gr)
- Page 14 Remove the thermocap to expose the heating chamber.
- Page 15 Insert the already packed ceramic or disposable cup into the heating chamber.
- Page 16 Place the thermocap back onto the top of the heating chamber.
- Page 17 DRAW-RESISTANCE Insert the rubber heat valce into the thermocap for a stronger draw-resistance (recommended for herb mode)
- Page 18 THERMODIAL indicator will turn on with an orange color. Thermodial...
- Page 19 To control the heat setting turn the thermodial. Lower Higher...
- Page 20 The temperature settings are as shwon on the image below. Each gradation step is the equivalent of 5° Celsius.
- Page 21 The temperature settings are shown on the LED indicator. The Higher the temp is set the closer the LED strips are to the middle. Lower temp Higher temp...
-
Page 22: Tips And Tricks
TIPS & TRICKS Not all tobaccos are created equal. We recommend for users to start the perature change to take effect. Make sure to loosen the tobacco with the poking tool after packing the cups ightl y to ensure proper air movement through the tobacco. - Page 23 3 times WHAT IS THE DIFFERENCE BETWEEN REGULAR MODE AND G-MODE In regular mode, the temperature is being regulated by Enso's sophisticated heating algorithm. Features a 70°C+ pre-heat in a 5-minutes pre-heating program. In G-Mode the power distribution is more linear to counterbalance the cooling from more frequent draws.
- Page 24 CLEANING For easier cleaning empty the cups after each usage as soon as they have cooled down and are safe to touch. warm water for at least 30 minutes. The ENSŌ Multi-tool contains: - Cup removal tool - Poking tool - Ceramic cup scraper - Chamber scraper...
- Page 25 Use the chamber scraper on the Multi-tool to clean the heating chamber after each use. Just insert the scraper plate into the chamber and scrape the interior by rotating the plate.
- Page 26 Use the cup scraper on the Multi-tool to clean the ceramic chamber after each use. Simply insert the scraper plate into the ceramic cup and scrape the interior by rotating the plate.
- Page 27 To clean the vaporshaft use the long brush with warm water. Use the long brush to scrub with upwards and downwards motion.
- Page 28 The blowoutvalve can be removed and replaced by a second vaporhose for double hose usage. It is recommended for the blowout valve to be taken out and rinsed with water and 1-2 uses.
- Page 29 / outwards motion.
- Page 30 The mouthpiece stem can be screwed off and both the stem and mouthpiece can be cleaned with the short brush.
- Page 31 Clean the airpath tubes by inserting the short brush into easch individual airpath.
- Page 32 DIP TUBE of the rubber housing.
- Page 33 WITH LOOSE-LEAF To use Ensō with loose leaf, insert the screen mesh into the bottom of the ceramic cup and fill the cup with the desired quantity (up to 3 gr) of the leaf of your choice. The ceramic cup is ideal for medium to heroic doses so please enjoy responsibly.
- Page 34 WHAT IS THE DIFFERENCE BETWEEN REGULAR MODE, G-MODE AND BLUE MODE In regular mode, the temperature is being regulated by Enso's sophisticated heating algorithm Features a 70°C+ pre-heat in a 5-minutes pre-heating program. In G-Mode the power distribution is more linear to counterbalance the cooling from more frequent draws Features no extra heat in the 5-minutes pre-heating time.
- Page 35 THANK YOU FOR CHOOSING ENS ! FOR ADDITIONAL QUESTIONS ABOUT ENS PLEASE VISIT US AT: ensoshisha.com/support Secure your warranty and unlock exclusive perks Register quickly at ensoshisha.com/warranty or scan the QR code below. WARM REGARDS, THE EN TEAM.
- Page 36 MagicVaporizers – Europe’s Best Shop for Vaporizers ● Lowest prices ● Fastest shipping ● Most trusted warranty...
Need help?
Do you have a question about the ENSO and is the answer not in the manual?
Questions and answers