PARTS & DESCRIPTION LIST OF COMPONENTS Steam Nozzle Water Tank Inlet Valve Hanger Hook Steam Hose Connector Hanger Pants Clip Water Tank Hanger Brush Head (with Pants Clip) Telescopic Pole Clips Control Panel Knob Telescopic Pole Drain Plug (bottom) Steam Hose...
Page 3
WARNINGS ATTENTION : Read this booklet carefully as it contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference. The following basic precautions should always be followed when using electrical appliances: Read all instructions before using the appliance. The Appliance This appliance must be used only for the purpose it was expressly designed;...
Page 4
The appliance should NOT be placed on a surface, or in the vicinity of objects, which can be damaged by heat, such as carpets, curtains, textiles or plastics. DO NOT use the appliance when placed in a closed cabinet. During operation, as heat is transferred away from the appliance, the surface that the appliance is placed upon as well the surface immediately above or adjacent to it may become very hot.
Page 5
• place the Steam Nozzle directly on any surface or on any part of the appliance when the Steam Nozzle is hot or plugged in; move the Main Body whilst in operation and extreme caution must be exercised when • moving it even after the appliance is switched off;...
HOW TO ASSEMBLE 1. Insert the Telescopic Pole into the Telescopic Pole Inlet of the Main Body. Telescopic Pole Inlet Steam Hose Inlet 2. ① Insert the Hanger Hook into the Hanger. ② Insert the bottom of the Hanger into the top of the Telescopic Pole.
HOW TO USE Place and use the appliance on a horizontal, stable and heat-resistant surface. There should be at least 20 cm around the appliance. Plug the power cable into the wall socket. Switch the wall switch ON. Rotate the Control Panel Knob to the appropriate setting. Heating takes 45 seconds after which the Garment Steamer is ready for use.
HOW TO CLEAN Rotate the Control Panel Knob to OFF, switch the wall switch OFF and unplug the power cable from the wall socket. Wait for 30 minutes to allow sufficient time for the appliance to cool. Proceed to Step 6 if Water Tank cleaning is required at this time. Otherwise, continue below. Unplug the Steam Hose.
PROBLEM SOLVING Problem Possible Causes How to Solve The appliance The appliance is Plug the power cable into the wall socket and does not operate. not plugged in. switch the wall switch ON. Household power Check the household circuit breaker for any circuit has blown.
However, if the customer still requests that the defective appliance be repaired, PowerPac Electrical Pte Ltd may, at its discretion, repair the appliance but impose a labour charge, as well as the costs of the replacement parts, to be borne solely by the customer.
Need help?
Do you have a question about the PPIN619A and is the answer not in the manual?
Questions and answers