PARTS & DESCRIPTION Lid Handle Spout Glass Jug Handle Control Panel Select Button Base...
Page 3
WARNINGS ATTENTION : Read this booklet carefully as it contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference. The following basic precautions should always be followed when using electrical appliances: Read all instructions before using the appliance. The Appliance This appliance must be used only for the purpose it was expressly designed;...
Avoid placing the power cable (and extension cable, if used) on abrasive or sharp surfaces or in positions where it can be damaged easily. Avoid placing heavy objects on the cable. The cable must NOT be placed under carpets, or covered with throw rugs, runners or similar. Arrange the cable away from high traffic areas, and where it will NOT be tripped over.
Page 5
• touch any part of the appliance, except the Lid, Handle, Select Button and plug, when the appliance is hot. The Base and the bottom of the appliance become exceedingly hot as the appliance operates. Do note that the heating element surface is subject to residual heat, and liquids &...
HOW TO USE Filling the Glass Jug Switch the wall switch OFF and unplug the power cable from the wall socket when not in use and before filling, emptying and cleaning the appliance. Lift the Lid. Fill the appliance with fresh tap water until the FULL mark. DO NOT fill water lower than the minimum volume or higher than the maximum volume as indicated by the lines drawn on the Glass Jug before boiling.
HOW TO CLEAN Switch the wall switch OFF and unplug the power cable from the wall socket. Hold the Lid Handle and lift the Lid carefully as it will be accompanied by a sizeable amount of hot of steam with droplets of hot water dripping down from the Lid. Beware of scalding! Pour out any water contained in the Glass Jug.
However, if the customer still requests that the defective appliance be repaired, PowerPac Electrical Pte Ltd may, at its discretion, repair the appliance but impose a labour charge, as well as the costs of the replacement parts, to be borne solely by the customer.
Need help?
Do you have a question about the PPJ2031 and is the answer not in the manual?
Questions and answers