1. Manuals
  2. Brands
  3. STLab Manuals
  4. PCI Card
  5. I-420
  6. User manual

STLab I-420 User Manual

2s1p
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

2S1P PCI Card
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
Respective owners.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the I-420 and is the answer not in the manual?

Questions and answers

Related Manuals for STLab I-420

Summary of Contents for STLab I-420

  • Page 1 2S1P PCI Card User Manual Ver. 1.00 All brand names and trademarks are properties of their Respective owners.

  • Page 2: Features And Benefits

    Features and Benefits Features Compliant with PCI Local Bus Specification, Revision 2.3 Supports 2 x UART serial ports Add one IEEE 1284 Parallel Port on system Easy Plug and Play Automatically selects IRQ & I/O address Built-in 16C450/550 compatible UART On chip 256 byte FIFOs in transmit and receive path of each serial port Serial data transfer rate up to 115200bps...

  • Page 3: System Requirements

    System Requirements Windows® 2000, XP/2003 32/64 bit, Vista 32/64 bit Available PCI slot Package Contents 1 x 2S1P PCI Card 1 x Driver CD 1 x User’s Manual Hardware Installation Turn Off the power to your computer. Unplug the power cord and remove your computer’s cover. Remove the slot bracket from an available PCI slot.

  • Page 4: Driver Installation

    Driver Installation For Windows® 2000/XP/Server 2003 Don’t insert the PCI card into PCI slot. At the Windows desktop click Start, then Run. Type D:\PCI_IO\MCS9865\XP\PciSetup.exe, then click OK. Press “Install” button to install the drivers. Click “Exit” button to complete the driver installation. Shutdown the PC.

  • Page 5: For Windows Vista

    installing the device driver software. For Windows® Vista Don’t insert the PCI card into PCI slot. Type D:\PCI_IO\MCS9865\Vista32\PciSetup.exe, then click Press “Install” button to install the drivers. Click “Exit” button to complete the driver installation. Shutdown the PC. Place the PCI card into PCI slot and then power on the system. Once the system gets booted the Windows will automatically start installing the device driver software.

  • Page 6: To Verify Windows® Driver Installation

    Place the PCI card into PCI slot and then power on the system. Once the system gets booted the Windows will automatically start installing the device driver software. To Verify Windows® Driver Installation Click on the Device Manager tab in System Properties, which you access from the Windows Control Panel.

Table of Contents