Conquer CQL1539-B Instruction Manual

Instruction Manual (Read before proceeding)
Power:
Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use. To charge the battery :
Using a Micro USB cable (included), insert the jack into the "Charging" hole and then
plug the USB connecter into the USB port on a computer for charging.
A red light will indicate the charging situation. When battery is full, the red light will
turn off automatically.
Bluetooth Speaker Operation
Turn on the unit by pushing the switch to
indicate the speaker is in paring mode and searching for your Bluetooth mobile
device.
Open the Bluetooth function on your device and search the speaker named
After selecting this speaker, your device will pair without a password. (If required,
enter the password "0000" to finalize the paring).The Blue light will begin to flash
slowly after pair is complete.
Start playing music on your device. Keep your device within 33feet (10 meters) of
your speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in use.
Caution:
This is not a toy. Please keep away from children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not over charge the battery.
CQL1539-B Bluetooth Speaker
on
position. A Blue light will start blinking to
"SB-02".