General Safety Instructions Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the completed warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to.
Page 3
• Unplug the unit from the power outlet after use to avoid possible damage during electrical storms, or when the equipment will be unattended or unused for a long period of time. • Do not let the cord hang over the edge of a table or counter, or touch any hot surface.
Page 4
• The equipment is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. •...
Page 6
LOCATION OF CONTROLS 1. Speaker 2 REC button 3 Stop button 4 Play/pause 5 Mode function select 6 Skip down button 7 Skip up button 8 BT mode led 9 Aux mode led 10 Phono mode led 11 USB mode led 12 REC mode led 13 Battery charging led 14 USB socket...
16 Needle 17 33/45/78 speed switch 18 Auto stop switch 19 Tone Arm 20 Tone Arm lock 21 Cartridge with style 22 45 rpm adaptor 23 Cover 24 tray 25 head-hone Jack 26 Aux In 27 DC Input Getting Started Before first use •...
Page 8
Caution! Usage of controls or adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. This unit should not be adjusted or repaired by anyone except qualified service personnel. In case of damage, or if service or repair is required, contact the after sales support line for advice.
Page 9
Instructions The Vinyl record player IMPORTANT! When using the turntable: • Make sure to remove the stylus protector, as illustrated on the right. (It should easily slide off the stylus assembly.) • Make sure to unclip the tone arm lock before use and to secure it again after use.
Page 10
7. Move the lift lever towards the front, the tone arm will gently drop onto the record and playback will start. 8. To stop playback, move the lift lever towards the back to raise the tone arm. The turntable will still be rotating but the record will stop playing. To continue playback, move the lift lever towards the front.
Page 11
4. The system will start the encoding mode after a few seconds. 5. To finish encoding, press the stop button. The rec led will light off and return to PHONO mode. NOTE: • The recording speed is 1:1. Recording will take as long as playing the record. •...
Page 12
to fast forward through the files/tracks. SKIP DOWN Press this button once to play the previous file, press and hold this button to fast reverse through the files/tracks. MODE Press this button to toggle between BT OUT/BT /AUX/PH/REC Important notes •...
3.Automatically search for nearby Bluetooth devices will be automatically connected . 4.After the connection, you can press the mode key to select (AUX/PHONO/USB ) the mode to play,. NOTE: • The blue-tooth out sound cant control for volume. Listening to Bluetooth 1.
Page 14
• Clockwise rotate the power/volume knob to increase the volume. • Make sure the unit’s power cord is connected to an appropriate electrical outlet. • Make sure the wall socket is switched on. • Make press the mode key is set to your desired function: PHONO, USB /Bluetooth out /Bluetooth AUX.
Need help?
Do you have a question about the DL-636DP-90 and is the answer not in the manual?
Questions and answers