Product Overview Multi-function Button(MFB) Earphone LED Light Built-in Mic Charging Case Earbuds Power Display Power Display Type-C Charging Port Please kindly note that the wireless charging area is on the back of the charging case.
Specifications Model Name: N7 Bluetooth Version: V5.3 Support: AVRCP/HFP/HSP/A2DP/SBC/AAC Transmission Range: 33feet (without obstacle) Charging Time: about 2H Headphones Battery Capacity: 45mAh Charging Case Battery Capacity: 400mAh Charging Port: Type-C CAUTION ① Please remove the protective film before use, otherwise the headphones will not be able to charge.
Page 5
② Wear correctly to enhance sound quality. ③ Please clean the charging contact on earbud and charging pin on the charging case with alcohol wipes if the headphones can't be charged. To fix charging issue Charging Contact Charging Pin...
Page 6
Multi-Function Operations Incoming Call Press (L/R) Answer Earbud Once Press (L/R) End Call Earbud Once Press (L/R) Reject Call Earbud Twice Voice Assistance Note: in standby/ play mode Siri Press (L/R) Earbud Thrice...
Page 7
Music Mode Press (L/R) Play/Pause Earbud Once Press (R) Next Track Earbud Twice Press (L) Previous Track Earbud Twice Press & Hold Volume+ (R) Earbud Press & Hold Volume- (L) Earbud Note: 1 - Prompt sound "Du" will be produced when the volume reach minimum or maximum level.
Page 8
The battery icons will flash when charging, will turn off after fully charged. Features with NTC tempera control protection, N7 earbuds will not charge if the temperature reaches 45 degrees or higher. (Charging case will automatically protect themselves in that case.) It is recommended to stop charging (or...
Wireless Charging Supported We recommend you to use wireless charging pad (not included) with QI certificate. Power On/Off Automatically Power On/Off Open the lid of the charging case and the earbuds will power on automatically. Put the earbuds into the charging case and close the lid, the earbuds will power off automatically.
Page 10
Manually Power On Press & hold both earbuds for 2 secs, it will flash light Blue and then power on. Press & hold 2 secs Manually Power Off Press & hold either earbud for 5 secs, it will flash light and then power off.
Step 1 Open the lid of charging case, two earbuds will automatically power on and enter pairing mode. Step 2 Activate Bluetooth setting on your phone, search and connect “N7”. 12:00 Bluetooth Bluetooth Now discoverable as "My iphone". MY DEVICES...
Thus, if you want to pair them with other device, you should disconnect “N7” from the last paired device, AND forget the pairing record on the last device. Then try to connect them to a new device, they should work...
Page 13
When both earbuds fail to pair with each other or occur connection related issues. How to reset? Delete all “N7” from the Bluetooth menu on your phones and deactivate the bluetooth setting. Press & hold either earbud for 5 secs, it will flash Red light and then power off.
Page 14
Thank you for purchasing the authentic product. For more newer products, parts and accessories, please visit: www.capoxo.store For any assistance please contact Email: service@capoxo.store Activate Warranty Contact Us...
Need help?
Do you have a question about the N7 and is the answer not in the manual?
Questions and answers