9.
Remove one screw holding the cable then remove the cable.
Removing the LCD Module
1.
Disconnect the inverter cable.
2.
Tear off the tape on the inverter shielding.
3.
Remove the two screws holding the LCD right bracket.
4.
Remove the LCD right bracket.
5.
Remove the three screws holding the inverter shielding.
6.
Detach the inverter shielding carefully.
7.
Remove the eight screws that secure the PCB tray.
8.
Detach the PCB tray as shown.
9.
Then disconnect the cable (main board to LCD).
50
Chapter 3