Related Manuals for Moxi V100 Mocap Suit
Summary of Contents for Moxi V100 Mocap Suit
- Page 1 MOXI V100 Mocap Suit User Manual From Animation to Virtual Interaction moxisens.com Last January 7, 2025 2025 2 5...
-
Page 2: Table Of Contents
If you have any further questions, refer to the contact information on the back of the manual or visit the MOXI V100 official website for assistance. Table of Contents 01 MOXI V100 Equipment Overview ..2 02 Motion Capture suit Wearing Process ..........4... - Page 3 Vest Belt Weight: 294 g Weight: 144 g Size: Size: • Length 40 cm Minimum: 70 cm • Shoulder Width 36 cm Maximum: 130 cm • Chest Circumference Minimum 54 cm to Maximum 90 cm Upper Arm Strap Leg Strap Weight: 89 g Weight: 114 g Size:...
-
Page 4: Motion Capture Suit Wearing Process
MOXI V100 Mocap Suit Motion Capture suit Wearing Process MOXI V100 Quick Wear Guide This product comes with two HUB sensors and eight USB sensors. Before wearing the motion capture suit, please install the corresponding sensors in their respective positions. - Page 5 This completes the wearing the elastic band, securing it just below the knee. of the MOXI V100 motion capture suit. Adjust the tightness to a secure and non-slipping state. Please note that the “Sensor” label on the sensors should be facing upwards and towards the outside.
- Page 6 MOXI V100 Mocap Suit 2-9 Bluetooth wireless MOTi and strap 2-10 Bluetooth wireless MOTi long strap installation method installation position Attach each of the three Bluetooth wireless MOTi The long strap is mounted on the head. sensors securely to the straps.
-
Page 7: Connecting Motion Capture Suit To The Equipment
Connecting Motion Capture suit to the Equipment MOXI V100 provides both “wired” and “wireless” methods to connect with the equipment. 3-1 Connecting the Data Cables from Vest and Belt to the USB Hub First, connect the USB cable (50 cm) from the vest and the USB cable (90 cm) from the belt to the USB HUB separately. - Page 8 Using the provided USB adapter, connect the male end to the Android phone and the female end to the USB HUB. 3-3 Connecting to MOXI VISTA Computer Program For detailed instructions, please refer to page 10. 3-4 Securing USB Cables...
-
Page 9: Storage Of Usb Cables
Storage of USB Cables 4-1 Storage of Vest Data Cable 4-2 Storage of Belt Data Cable First, insert the cable head into the opening on First, insert the cable head into the opening on the the vest component and fasten it with the clip. belt component. -
Page 10: Installing Moxi Vista Software
Download Whether you are connecting via an Android phone * At least Android operating system version 8.0 or above is or USB cable, you need to install the MOXI VISTA required. software on your computer. Please download and * The system requirements for running MOXI VISTA are install the program from the official website. -
Page 11: Connection Settings
Connection Settings Before connecting with the motion capture suit, it is necessary to load a virtual character in the MOXI VISTA program to perform calibration and positioning with the real actor. - Page 12 “MOXI Connect” app on your phone, and it will automatically establish the connection. Please note that the phone on which the “MOXI Connect” app is installed must be on the same network domain as the operating computer to ensure successful connection.
- Page 13 7-3 Explanation of MOXI VISTA Connection Status Display MOXI VISTA provides the ability to perform and record upper body and lower body movements separately. Users can choose to connect either the upper body or lower body based on their needs.
-
Page 14: Motion Capture, Calibration And Reorientation
Click “Start Calibration,” and a “Calibrating” window will appear on the screen. Follow the system instructions to perform full-body movements. MOXI VISTA will calibrate various parts of the body. Once calibration is complete, the respective items will display green indicators.”... -
Page 15: The Method Of Moving The Virtual Character
8-3 Repositioning You can operate without ending the motion capture. During the motion capture process, pressing “Reorientation” will instantly reset the virtual character to its initial position. The method of moving the virtual character Movement and Scaling of 3D Virtual Characters You can use the mouse to move the 3D character. - Page 16 Contact us Email: support@moxisens.com Address: B2, 3F, No.1, Li-Hsin 1st Road, Hsinchu Science Park, Hsinchu, Taiwan 30078, R.O.C. Tel: +886-3-6661036 https://moxisens.com...
Need help?
Do you have a question about the V100 Mocap Suit and is the answer not in the manual?
Questions and answers